TPA1861/TPA1862/TPA1864 36V, 6MHz, Zero Drift Op Amps
The TPA186X series amplifiers are newest high supply voltage amplifiers with 30μV low offset, low noise and stable high frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve very good AC performance with 6MHz bandwidth, 5V/μs slew rate and low distortion while drawing only 1.6mA of quiescent current per amplifier. The input common-mode voltage range extends to V–, and the outputs swing rail-to-rail. The TPA186X family can be used as plug-in replacements for many commercially available op-amps to improve input/output range and performance. The TPA186X has over-temperature protection feature to guarantee the chip safe. The output of TPA186X will enter high impendence when die temperature reach around 170°C and will recover the function when the die temperature down to around 150°C
●Features:
■Supply Voltage: 4.5V to 36V
■Offset Voltage: ±30μV Maximum
■Differential Input Voltage Range to Supply Rail, can Work as Comparator
■Input Rail to –VS, Rail to Rail Output
■Drive any capacitive load
■Bandwidth: 6MHz, Slew Rate: 5V/μs
■Excellent EMI Suppress Performance: 85dB at 1GHz
■Over-Temperature Protection
■Low Noise: 8nV/√Hz at 1kHz
■2KV HBM, 1KV CDM, 500mA Latch Up
■–40°C to 125°C Operation Temperature Range
TPA1861 、 TPA1862 、 TPA1864 、 TPA186X series 、 TPA186X 、 TPA1861-SR 、 TPA1861-TR 、 TPA1862-SR 、 TPA1862-VR 、 TPA1864-SR 、 TPA1864-TR |
|
Zero Drift Op Amps 、 high supply voltage amplifiers 、 amplifiers |
|
[ Instrumentation ][ Active Filters ][ ASIC Input or Output Amplifier ][ Sensor Interface ][ Motor Control ][ Industrial Control ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT23;SOIC;MSOP;TSSOP;SOT23-5;SOIC-8;TSSOP-8;MSOP-8;SOIC-14;TSSOP-14 |
|
English Chinese Chinese and English Japanese |
|
2020/4/26 |
|
Rev.A |
|
|
|
1.7 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.