Product Manual of TFmini-S LiDAR Module
◆This manual provides all the essential information during the usage of this product.
◆Please carefully read this manual and make sure that you fully understand everything herein.
●Usage of Product：
◆The maintenance of this product should be done by the professional technician, and the product can only work with the factory spare part for ensuring the performance and safety.
◆This product itself has no polarity and over-voltage protection. Please properly connect and supply power as described in this manual.
◆Operating temperature of this product is between 0℃ and 60℃. Do not use it beyond this temperature range to prevent malfunction.
◆Storage temperature of this product is between -20℃ and 75℃. Do not store it beyond this temperature range to prevent malfunction.
◆For ensuring the product performance, do not open the product shell or remove the IR-pass filter.
●Conditions with Potential Malfunction:
◆Detecting object with high reflectivity, such as the mirror or the smooth floor tile, may cause a system malfunction.
◆The product will malfunction if there is any transparent object between it and the detecting object, such as glass or water.
◆The product will be subject to risk of failure if its transmitting or receiving len is covered by the dust. Please keep the lens clean.
◆Please do not directly touch circuit board of the product by hand as it is exposed. Please wear antistatic wrist strap or glove if necessary; Otherwise, the product will be subject to risk of failure, which is shown by failure of normal operation, and even it will be broken.
●Product description：
TFmini-S is an upgrade project based on TFmini. It is a miniaturized, single-point ranging product. Based on the ToF (time of flight) principle, it is designed with unique optics, electricity, and algorithms to achieve stability, precision, sensitivity and high-speed distance measurement function. In addition to the low-cost, small-size, and long-ranging of the TFmini, the product itself has higher distance measurement accuracy. It is more adaptable to different outdoor environments such as strong light, different temperatures, and different reflectances. It has lower power consumption and more flexible detection frequency. The product is compatible with both the UART and I²C interface. Different interfaces can be switched by commands.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
|
|
|
|
|
|
|
|
|
1.8 MB |
- +1 Like
- Add to Favorites
Recommend
- Benewake Offers A Low Cost Solution for Aunattended ETC Quick Toll Collection
- How to Apply Low-cost Single-point LiDARs for Coal-flow Volume Measurement
- Benewake‘s TF Series Single-point LiDAR Designed for Forks Obstacle Avoidance
- Benewake‘s LiDAR Used in Intelligent Roadside Parking, Supporting Black Car Ultra-distance Detection
- TFSeries Lidar That Can Be Used as Fall Detection Sensor of the Robot
- Based on TOF, Benewake‘s Lidar Can Be Integrated into the Robot and And Realize Obstacle Avoidance
- Benewake LiDAR Sensors Improve Vehicle Mobility and Overcomes Parking Problem in Three-dimensional Parking
- MiniSKiiP®PIM and MiniSKiiP®PACK with IGBT M7 - for Real Chip-level Multi Sourcing
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
