MS721 METER-BUS TRANSCEIVER
MS721 is a single chip transceiver developed for Meter-Bus standard (EN1434-3) applications.
The MS721 interface circuit adjusts the different potentials between a slave system and the Meter- Bus master. The connection to the bus is polarity independent and supports full galvanic slave isolation with optocouplers.
The circuit is supplied by the master via the bus. Therefore, this circuit offers no additional load for the slave battery. A power-fail function is integrated.
The receiver has dynamic level recognition, and the transmitter has a programmable current sink.
A 3.3-V voltage regulator, with power reserve for a delayed switch off at bus fault, is integrated.
●FEATURE：
■Meter-Bus Transceiver (for Slave) Meets Standard EN1434-3
■Receiver Logic With Dynamic Level Recognition
■Adjustable Constant-Current Sink via Resistor
■Polarity Independent
■Power-Fail Function
■Module Supply Voltage Switch
■3.3-V Constant Voltage Source
■Remote Powering
■Up to 9600 Baud in Half Duplex for UART Protocol
■Slave Power Support
◆Supply From Meter
◆Bus via Output VDD
◆Supply From Meter-Bus via Output VDD or From Backup Battery
◆Supply From Battery
◆Meter-Bus Active for Data Transmission Only
|
[ Meter-Bus ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SOP16 |
|
|
English Chinese Chinese and English Japanese |
|
|
2019.01.24 |
|
|
Version:1.4 |
|
|
|
|
|
1.7 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
