MA210.K.CG.001 adhesive-mount Wi-Fi MIMO 2-in-1 antenna Datasheet
Optimus 2-in-1 Low Profile Adhesive Mount 2*Wi-Fi(including Wi-Fi 6) MIMO With 3m Braided Cable Assembly
Features:
●2.4GHz/5.8~7.125GHz Bands
●2*Wi-Fi (including Wi-Fi 6) MIMO
●3M Adhesive Mount
●IP67 Rated Enclosure
●Cables: 3000mm in Braid
●Connectors: RP-SMA(M)
●Dimensions: 62.8*68*12mm
●RoHS & Reach Compliant
Introduction:
The MA210 Optimus is an adhesive-mount Wi-Fi MIMO 2-in-1 antenna with high efficiency across the full spectrum of Wi-Fi (including Wi-Fi 6) bands. The MIMO capabilities of this antenna allow for increased channel capacity and reduced transmitting power, making it an excellent choice for high speed wireless applications. The MA210 Optimus comes in a quality, low-profile housing with high grade 3M double-sided tape for quick and easy mounting on glass, plastic, or even out of sight under a dashboard. The enclosure is rated IP67 for water resistance and outdoor usage. The 360mm RG-174 cable pigtails combine with 2,640mm of braided CFD-200 cables to ensure low losses over the 3000mm cable length.
Many module manufacturers specify peak gain limits for any antennas that are to be connected to that module. Those peak gain limits are based on free space conditions. In practice, the peak gain of an antenna tested in free space can degrade by at least 1 or 2 dBi when put inside a device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the module specification to compensate for this effect, giving you better performance.
Upon testing of any of our antennas with your device and a selection of appropriate layout, integration technique, or cable, Taoglas can make sure any of our antennas' peak gain will be below the peak gain limits. Taoglas can then issue a specification and/or report for the selected antenna in your devicethat will clearly show it complying with the peak gain limits, so you can be assured you are meeting regulatory requirements for that module.
For example, a module manufacturer may state that the antenna must have less than 2 dBi peak gain, but you don't need to select an embedded antenna that has a peak gain of less than 2 dBi in free space.This will give you a less optimized solution. It is better to go for a slightly higher free space peak gain of 3 dBi or more if available. Once that antenna gets integrated into your device, performance will degrade below this 2 dBi peak gain due to the effects of GND plane, surrounding components, and device housing. If you want to be absolutely sure, contact Taoglas and we will test. Choosing a Taoglas antenna with a higher peak gain than what is specified by the module manufacturer and enlisting our help will ensure you are getting the best performance possible without exceeding the peak gain limits.
Cables and Connectors are customizable, contact your regional Taoglas customer support team for further information.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020-09-16 |
|
|
Revision: C |
|
|
SPE-18-8-049-C |
|
|
1.7 MB |
- +1 Like
- Add to Favorites
Recommend
- Taoglas Announces The Most Comprehensive Portfolio of Next Generation Wi-Fi 6 Antennas
- Taoglas ＆ LvLogics‘ Silo Monitoring IoT Solution Wins “Smart Agriculture Solution of the Year“ in 2021 IoT Breakthrough Awards Program
- Taoglas Strengthens its IoT Managed Services Offering with Acquisition of Smartsensor Technologies
- Taoglas Launches a New Wideband Omnidirectional Antenna for Use in Mission Critical Communications
- TG.09 4G Terminal Hinged SMA(M) Mount Monopole Antenna Covering Worldwide 4G Bands between 700-3800MHz | Taoglas
- Taoglas Unveils New Compact Active Multiband GNSS Antennas for Critical High-accuracy Positioning and Timing
- Taoglas Genset Insights Combined with Its Cloud Platform, Providing A Scalable End-to-end Solution
- Taoglas and LvLogics Finalists for Global Mobile Award, at Mobile World Congress 2021
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
