ISL32600E, ISL32601E, ISL32602E, ISL32603E 1.8V to 3.3V, Micro-Power, ±15kV ESD, +125 °C, Slew Rate Limited RS-485/RS-422 Transceivers
The Rx inputs feature symmetrical switching thresholds and up to 65mV of hysteresis to improve noise immunity and to reduce duty cycle distortion in the presence of slow moving input signals (see Figure 39 on page 18). The Rx input common-mode range is the full -7V to +12V RS-485 range for supply voltages ≥ 3V.
Hot plug circuitry ensures that the Tx and Rx outputs remain in a high impedance state while the power supply stabilizes.
This transceiver family uses slew rate limited drivers, which reduce EMI, and minimize reflections from improperly terminated transmission lines or from unterminated stubs in multidrop and multipoint applications.
The ISL32600E and ISL32602E are configured for full duplex (separate Rx input and Tx output pins) applications. The ISL32601E and ISL32603E are half duplex versions that multiplex the Rx inputs and Tx outputs to allow transceivers with output disable functions in 8 Ld packages. Table 1 on page 3 provides a summary of each device’s features.
ISL32600E 、 ISL32601E 、 ISL32602E 、 ISL32603E 、 ISL32600EFBZ 、 ISL32600EFBZ-T 、 ISL32600EFBZ-T7A 、 ISL32600EFUZ 、 ISL32600EFUZ-T 、 ISL32600EFUZ-T7A 、 ISL32601EFBZ 、 ISL32601EFBZ-T 、 ISL32601EFBZ-T7A 、 ISL32601EFUZ 、 ISL32601EFUZ-T 、 ISL32601EFUZ-T7A 、 ISL32602EFBZ 、 ISL32602EFBZ-T 、 ISL32602EFBZ-T7A 、 ISL32602EFUZ 、 ISL32602EFUZ-T 、 ISL32602EFUZ-T7A 、 ISL32603EFBZ 、 ISL32603EFBZ-T 、 ISL32603EFBZ-T7A 、 ISL32603EFUZ 、 ISL32603EFUZ-T 、 ISL32603EFUZ-T7A 、 ISL3260xE |
|
[ Differential sensor interfaces ][ Process control networks ][ Security camera networks ][ Building environmental control systems ][ Building environmental lighting systems ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOIC;MSOP |
|
English Chinese Chinese and English Japanese |
|
Jan 31, 2019 |
|
Rev.2.00 |
|
FN7967 |
|
2.4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.