ADFGP.50A.07.0100C Embedded Active GNSS Dual Stacked Patch Antenna with 100mm of 1.37& IPEX MHFI Datasheet
Embedded Active GNSS Dual Stacked Patch Antenna with 100mm of 1.37 & IPEX MHFI
Features:
Embedded DualPatch, Dual Feed4-Pin Assembly Covering Bands:
•GPS/QZSS (L1/L2)
•GPS/QZSS/IRNSS (L5)
•Galileo (E1/E5a/E5b)
•GLONASS(G1/G2/G3)
•BeiDou (B1/B2a/B2b)
Low Axial Ratio
Cable: 100mm of 1.37mm
Connector: IPEX MHFI (U.FL)
Dimensions: 50x 50x 16.8mm
RoHS & Reach Compliant
The ADFGP.50A, with Taoglas Sure Technology, is a precision-engineered active dual patch, dual-feed antenna for GPS (L1/L2/L5), GLONASS (G1/G2/G5), Galileo (E1/E5a/E5b) and BeiDou (B1/B2). The antenna comes mounted on a 50*50 mm PCB (ground plane). It consistsof two stacked patches, 50mm, and 40mm in width and is 16.8mm thick.It has been tuned and tested on a 50*50mm ground plane specifically for GPS L1: 1575.42MHz, L2: 1227.6MHz and L5: 1176.45MHz as well as the GLONASS, Galileo,BeiDouand IRNSSbands shown in Section 2.
Each patch element uses two orthogonal feeds that are combined in a hybrid coupler to ensure optimal axial ratio. The antenna exhibits excellent gain and good radiation pattern stability leading to a reliable GNSS fix in areasof weaker signal strength. All these elements combined ensure the best possible positional accuracy for your device.
Bothpatch elementshavea dual pin feed to ensure a low axial ratio and should be used in conjunction with a hybrid coupler. The ADFGP.50A includes LNAs and front-end SAW filters to reduce out of band noise, such as from nearby cellular transceivers. It offers better protection from nearby radiated power surges and greatly reduces the probability of damaging your GNSS receiver from nearby transmissions.
Features:
•Multi-GNSS, high-performance antenna
•Excellent signal to noise ratio (C/N0)
•Good 2DRMS and fast TTFF
•Axial ratio < 2dB typ. across all bands
•Phase stability provides excellent Phase Center Variation (PCV)
Benefits:
•Excellent positional accuracy
•Great for use in difficult environments
•Multiband improves the receiver’s position estimation in terms of accuracy and reliability
•Ideal antenna solution for multiband RTK systems.
The ADFGP.50A is connected via an IPEX MHFI connector and works well without modifications in most environments, however, it can be tuned and optimized for different ground planes and enclosures if required. It is manufactured and tested in a TS16949 first tier automotive approved facility.
[ High accuracy positioning ][ navigation systems ][ UAVs ][ Robotics ][ Autonomous Vehicles ][ Micro-Mobility Solutions ][ Mapping ][ GIS ][ Transportation ][ Telematics ][ Precision Agriculture ][ Public Safety ][ Search ][ Rescue ][ RTK Systems ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2020-05-29 |
|
Revision: C |
|
SPE-19-8-133 |
|
2.2 MB |
- +1 Like
- Add to Favorites
Recommend
- Taoglas high-precision GNSS antenna helps Basetime enable ultra-accurate geometric height measurement for construction applications
- Taoglas & LvLogics‘ Silo Monitoring IoT Solution Wins “Smart Agriculture Solution of the Year“ in 2021 IoT Breakthrough Awards Program
- Taoglas Strengthens its IoT Managed Services Offering with Acquisition of Smartsensor Technologies
- Taoglas Launches a New Wideband Omnidirectional Antenna for Use in Mission Critical Communications
- TG.09 4G Terminal Hinged SMA(M) Mount Monopole Antenna Covering Worldwide 4G Bands between 700-3800MHz | Taoglas
- Taoglas Unveils New Compact Active Multiband GNSS Antennas for Critical High-accuracy Positioning and Timing
- Taoglas Genset Insights Combined with Its Cloud Platform, Providing A Scalable End-to-end Solution
- Taoglas and LvLogics Finalists for Global Mobile Award, at Mobile World Congress 2021
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.