KP201 Offline Current Mode PWM Controller with Built-in CC Regulation

2020-08-21
KP201 is a high performance current mode PWM controller for offline flyback converter applications. The IC has built-in General Primary Side CC control, which simplifies isolated power supply design that requires CC regulation of the output.
In KP201, PWM switching frequency with shuffling is fixed to 65 KHz and is trimmed to tight range. The IC has built-in green and burst mode control for light and no load condition, which can achieve less than 75mW standby power for sub 30W applications.
KP201 integrates functions and protections of Under Voltage Lockout (UVLO), VDD over Voltage Protection (VDD OVP), Cycle-by-cycle Current Limiting (OCP), Short Circuit Protection (SCP), Over Load Protection (OLP), On-Chip Thermal Shutdown (OTP), Soft Start, VDD clamping and CS Pin Float Protection, etc.
FEATURES
●Primary Side Constant-Current (CC) Control for DCM and CCM Operation
●±5% CC Regulation; ±1% CV Regulation
●Less than 75mW Standby Power
●Fixed 65KHz Switching Frequency
●Green Mode and Burst Mode Control
●Very Low Startup and Operation Current
●Built-in Frequency Shuffling to Reduce EMI
●Built-in Current Mode Control with Internal Slope Compensation
●Built-in Line & Inductance Compensation for CC Operation ●Built-in Protections with Auto Recovery:
VDD Under Voltage Lockout (UVLO)
VDD Over Voltage Protection (OVP)
On-Chip Thermal Shutdown (OTP)
Cycle-by-Cycle Current Limiting
Over Load Protection (OLP)
Short Circuit Protection (SCP)
Leading Edge Blanking (LEB)
CS Pin Float Protection
●Available with SOT23-6L Package

KIWI

KP201

More

Part#

Offline Current Mode PWM Controller

More

Chargers ]Adapter ]Motor Driver Power Supply ]

More

Datasheet

More

More

Please see the document for details

More

More

SOT23-6L

English Chinese Chinese and English Japanese

March 21, 2016

REV1.5

DS_KP201_REV1.5_EN

135 KB

- The full preview is over,the data is 1 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: