750-823 Controller EtherNet/IP; G4; 2ETH; ECO Controller EtherNet/IP; Generation 4; 2 x ETHERNET; ECO Manual
The WAGO-I/O-SYSTEM 750 is a modular, fieldbus-independent input/output system (I/O system). The configuration described here consists of a fieldbus coupler/controller (1) and the modular I/O modules (2) for any signal shapes that form the fieldbus node together. The end module (3) completes the node and is required for correct operation of the fieldbus node.
Fieldbus couplers/controllers are available for different fieldbus systems.
The ECO coupler contains the fieldbus interface, electronics and a power supplyfor the system. The fieldbus interface forms the physical interface to the relevant fieldbus. The electronics process the data of the bus modules and make it available for the fieldbus communication.
I/O modules for diverse digital and analog I/O signals as well as special functions can be connected to the fieldbus coupler/controller.
The communication between the fieldbus coupler/controller and the I/O modules is carried out via a local bus.The components of the WAGO I/O SYSTEM 750 have clear termination points, light emitting diodes for status display, plug-in mini WSB tags and group marker cards for labeling.
The 1, 2 or 3 wire technology supplemented by a ground wire connection allows for direct sensor or actuator wiring.
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
