787-1200 EPSITRON® COMPACT Power
Please especially observe the following:
• The device described in these instructions shall only be installed by a qualified electrician according to both EN 50110-1/-2 and IEC 60364.
• Before startup, check the device for any damage that may have occurred during shipping. The device shall not be put into operation in the event of mechanical damage.
• Observe the applicable laws, standards and regulations.
• Observe the current, accepted technology standards and practices at the time of installation.
• Only install this device in dry indoor rooms.
• Do not install the devices on or in the vicinity of easily flammable materials.
• Only use this device in a controlled enviroment.
• The device is an open system. The device must be installed in a suitable electrical and fire enclosure. This enclosure must:
■guarantee that the max. permissible pollution degree is not exceeded
■offer adequate protection against direct or accidental contact,
■guarantee mechanical stability over the entire operating temperature range
• Ensure proper handling to protect device during shipping and handling. Particularly during transport and handling, ensure that no parts are bent and that electrical spacing remains constant.
• Keep sufficient distance from adjacent components to avoid interfering with the cooling!
• The operator must provide a mains isolator in the device supply line. The OFF position must be clearly marked on this isolator. The isolator must be located near the device where it can be operated.
• This is a class A device and not intended to be installed in a residential environment. In commercial or small industrial environments with connection to the public mains supply the device may cause radio interferences. Possibly required measures to reduce interferences are to be made by the installer respectively user of the plant.
This product may only be used as described in this note and in the complete instructions. Use other than this may represent a risk to safe, intended use and will nullify the warranty or guarantee. WAGO Kontakttechnik GmbH & Co. KG is not liable for damage resulting from non-intended or improper use.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020/04/25 |
|
|
|
|
|
|
|
|
2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
