XCZU21DR Zynq UltraScale+ RFSoC DC and AC Switching Characteristics

2022-07-04

●The Xilinx® Zyng® UltraScale+™ RFSoCs are available in -2 and-1 speed grades,with -2E devices having the highest performance.The-2LE and-1LI devices can operate at a VcCINT voltage at 0.85V or 0.72V and are screened for lower maximum static power.When operated at VcCINT =0.85V,using-2LE and-1LI devices,the speed specification for the L devices is the same as the-21 or-1l speed grades.When operated at VCCINT 0.72V,the-2LE and-1LI performance and static and dynamic power is reduced.
●DC and AC characteristics are specified in extended(E),industrial(I),and military (M)temperature ranges. Except the operating temperature range or unless otherwise noted,all the DC and AC electrical parameters are the same for a particular speed grade(that is,the timing characteristics of a-1 speed grade extended device are the same as for a-1 speed grade industrial device).However,only selected speed grades and/or devices are available in each temperature range.
●The XQ references in this data sheet are specific to the devices available in XQ Ruggedized packages.See the Defense-Grade UltraScale Architecture Data Sheet:Overview(DS895)for further information on XQ Defense- grade part numbers,packages,and ordering information.
●All supply voltage and junction temperature specifications are representative of worst-case conditions.The parameters included are common to popular designs and typical applications.

Xilinx

XCZU21DRXCZU25DRXCZU27DRXCZU28DRXCZU29DRXCZU39DRXQZU21DRXQZU28DRXQZU29DRXCZU21XCZU25XCZU27XCZU28XCZU29XCZU39XQZU21XQZU28XQZU29

More

Part#

More

More

Datasheet

More

More

Please see the document for details

More

More

FFVD1156;FFVE1156;FSVE1156;FFVG1517;FSVG1517;FFVF1760;FSVF1760;FFRD1156;FFRE1156;FFRG1517;FFRF1760

English Chinese Chinese and English Japanese

June 5, 2019

v1.5

DS926

3.7 MB

- The full preview is over. If you want to read the whole 110 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: