Fn-Link 6110R-IN WiFi Single-band 1X1 802.11b/g/n IOT Module Datasheet
●Introduction
■6110R-IN is a highly integrated module with low power 802.11b/g/n Wireless LAN(WLAN) network controller. It combines an ARM-CM4 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RF function. It also provides a bunch of configurable GPIO which are configured as digital peripherals for different applications and control usage.
■6110R-IN integrates internal memories for complete WIFI protocol functions.
■6110R-IN integrates 512KB ROM to provide high access speed, low leakage memory. The ROM memory clock speed is up to 125MHz. The ROM lib provides the following functions:
▲Boot Code and MCU initialization.
▲Default UART driver.
▲Non-flash booting functions and drivers.
▲Peripheral libs.
▲Security functions libs.
●Features
■General
▲22.6mm*13.0mm*2.1mm
▲CMOS MAC, Baseband PHY, and RF in the module for 802.11b/g/n compatible WLAN
▲Complete 802.11n solution for 2.4G band
▲150Mbps receive PHY rate and 150Mbps transmit PHY rate using 40MHz bandwidth
■Standards Supported
▲802.11b/g/n compatible WLAN
▲802.11e QoS Enhancement(WMM)
▲802.11i(WPA,WP2). Open, shared key, and pair-wise key authentication services
▲WiFi Direct support
▲Light Weight TCP/IP protocol
■WLAN PHY Features
▲802.11n OFDM
▲One Transmit and one Receive path(1T1R)
▲20MHz and 40MHz bandwidth transmission
▲Short Guard Interval(400ns)
▲Maximum data rate 54Mbps in 802.11g and 150Mbps in 802.11n
■Host Interface
▲1 high speed UART
▲1 I2C
▲6 PWM
▲1 ADC
▲GPIO
WiFi Single-band 1X1 802.11b/g/n IOT Module 、 highly integrated module |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2017-12-01 |
|
Version 1.1 |
|
|
|
909 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.