PISL Product Change Notice 2211051
●Concerning Part Name: PISL, PISM, PISN, PISR
●Product Type: Power Inductor
●Classification of Change: Type of epoxy covering the solder area
●Description of Change: From a two component epoxy (gray color) to a one component epoxy (red color)
●REASON:The previous two component epoxy hardens after 20 minutes in use.This is neither suitable nor economical for batch manufacturing processes.
To continuously become a more environmentally friendly manufacturer, FASTRON strives to reduce the use of chemical wastage. Fast hardening of the epoxy and repeated epoxy preparation for new batches results in high wastage after batch completion. With the new epoxy, FASTRON can re-use remaining epoxy after batches have finished production.
●Expected Influence: No influence on electrical parameters
●Product Identification: Not applicable
●Product Availability: Implementation date is 5/12/05
●Prepared by: MK Ang.
|
|
PCN/EOL |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
29.Nov.2005 |
|
|
|
2211051 |
|
36 KB |
- +1 Like
- Add to Favorites
Recommend
- FASTRON 0402AQC Chip Inductor Series with High Q, Low Rdc and High DC
- FASTRON 0603FLP, a Series of Semi-shielded Wire-wound Chip Inductors Being Approved for Automotive Applications
- FASTRON 242418FP- A Non-shielded SMD Chip Inductors for Power Applications Due to Its Small Size of 6.1x6.2x4.5mm
- FASTRON 0603AQC High Current Ceramic Chip Inductor Series with Exceptionally Higher Q and Size 0603
- CCM Series | Axial Leaded Inductors with Phenolic Core, Available with ±10%, ±20% Inductance Tolerance
- Vincotech‘s fastPACK 0 MOS and fastPACK 1 MOS Modules Featuring Cost-effective H-bridge Topology with MOSFETs
- Chockfast® Dual Grouting System Prolongs Ball Mill Service Life at Processing Plant
- Chockfast® Red Absorbs Vibration and Maintains Alignment for Natural Gas Compressor Skid
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.