TSL2584TSV Light-to-Digital Device
●General Description
■The TSL2584TSV is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface. The device combines one broadband photodiode (visible plus infrared), one infrared-responding photodiode, and a photopic infrared-blocking filter on a single CMOS integrated circuit. Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response. The TSL2584TSV supports a traditional level style interrupt that remains asserted until the firmware clears it.
●Key Benefits & Features
■The benefits and features of TSL2584TSV, Light-to-Digital Device are listed below:
▲Approximates Human Eye Response
▲Flexible Operation
▲Suited for Operation Behind Dark Glass
▲Low Operating Overhead
▲Low Power
▲Industry Standard Two-Wire Interface
▲Ultra-Small Foot-Print
▲Unlimited Manufacturing Floor Life
▲Dual Diode with Photopic Filter
▲Programmable Analog Gain and Integration Time
▲1000000: 1 Dynamic Range
▲Programmable Upper and Lower Thresholds
▲Programmable Persistence Filter
▲3.0 μA Sleep State
▲I²C Fast Mode Compatible Interface
◆Data Rates up to 400 kbit/s
◆Input Voltage Levels Compatible with1.8−V Bus
▲1.145 mm x 1.660 mm TSV (Through Silicon Via)
▲0.218 mm Height w/o Solder Balls
▲MSL1 Rated
[ Operation Behind Dark Glass ][ Display Backlight Control ][ Keyboard Illumination Control ][ Printer Paper Detection ][ Medical Diagnostics ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2017-Aug-28 |
|
v1-08 |
|
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.