AQD-SD4U8GN24-SE Advantech Datasheet
●Description
■DDR4 1.2V SO-DIMM is high-speed, low power memory module that use 1Gx8bits DDR4 SDRAM in FBGA package and a 4096 bits serial EEPROM on a 260-pin printed circuit board. DDR4 1.2V SO-DIMM is a Dual In-Line Memory Module and is intended for mounting into 260-pin edge connector sockets.
■Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
●Features
■RoHS compliant products
■JEDEC standard 1.2V (1.14V to 1.26V) Power supply
■VDDQ=1.2V (1.14V to 1.26V)
■Clock Freq: 1200MHZ for 2400Mb/s/Pin
■16 Banks (4 Bank Groups)
■Programmable CAS Latency: 10, 11, 12, 13, 14,15,16, 17,18
■Programmable Additive Latency (Posted /CAS): 0,CL-2 or CL-1 clock
■Programmable /CAS Write Latency (CWL) = 12,16 (DDR4-2400)
■8 bit pre-fetch
■Burst Length: 4, 8
■Bi-directional Differential Data-Strobe
■On Die Termination with ODT pin
■Serial presence detect with EEPROM
■Asynchronous reset
■PCB: 30μ gold finger
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2017-01-05 |
|
|
Rev. 1.0 |
|
|
|
|
|
511 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
