New water cooler for very large power semiconductors PRESS RELEASE
●Westcode Semiconductors Limited (An IXYS company) announces a new addition to its range of power semiconductor water coolers. The Nickel-plated copper cooler has a 127mm diameter contact plate, making it suitable for press-pack devices with electrode contacts up to 125mm diameter.
●The new coolers incorporate geometric water channels designed to ensure low values of thermal resistance, even at moderate coolant flows, while retaining a robust structure compatible with the high clamping force required by large area power semiconductors. The geometric design used for the water channels also ensures a highly uniform cooling over the entire surface area. Typical cooler to input water thermal resistance for flow rate of 10 l/m are 4.3 K/kW (two coolers + 1 semiconductor) and 5.6 K/kW (three coolers + 2 semiconductors).
●The high quality surface finish, typical flatness 20μm, makes the cooler ideal for use with Westcode’s high performance Press-pack IGBTs (T1800EB45A & T2400EB45E). Additionally, the coolers are suitable for use with all large area power devices such as Thyristors and Rectifier Diodes, with contact electrodes from 90mm to 125mm diameter and clamping pressure up to 13 x106 Pa. Typical applications for the coolers would be in Megawatt drives and high power rectifiers, such as chemical power supplies or trackside substations, as well as all applications in the utilities field.
●The cooler is available in two versions; XW180GC34A without integral connecting bus bar and XW180GC34B with integral connecting bus bar. Limit dimensions of the cooler are 147mm x 142mm (262mm for the version with bus bar) x 34mm thick, water connection is 3/8 BSPP x 34mm Deep (minimum thread depth 14mm). Adapted versions with customised bus bar connections can be considered, please consult factory.
|
|
Supplier and Product Introduction |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
16th January 2009 |
|
|
|
|
|
47 KB |
- +1 Like
- Add to Favorites
Recommend
- 1A Fault Protected Solid State Relay with Integrated Current Limiting and Thermal Shutdown | Littelfuse
- Littelfuse Completes Acquisition of C&K Switches
- Littelfuse Named One of America’s Best Mid-sized Companies by Forbes
- Littelfuse Launches 1500 Volt Solar String Fuse and Holder Rated 35 to 60 Amperage
- Littelfuse IX4351NE SiC MOSFET & IGBT Driver Wins Annual Power Product Award
- Littelfuse Acquires Embed,Embedded software and firmware expands technical capabilities
- Littelfuse to Acquire Carling Technologies, Accelerates growth in commercial vehicles and communications infrastructure
- Littelfuse Completes Acquisition of Carling Technologies
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.