DSA800 Series Spectrum Analyzer Performance Verification Guide
This manual guides users to correctly test the performance specifications of RIGOLDSA800 series spectrum analyzer. For the operation method of the instrument, please refer to the corresponding User’s Guide.
Test Preparations:
Before performing the test, make the following preparations.
1)Warm the spectrum analyzer up for at least 30 minutes.
2)Make sure that the instrument is within the calibration period (1 year) and perform self-calibration on the spectrum analyzer (press System→Calibrate→Cal Now and the spectrum analyzer performs self-calibration immediately using the internal calibration source).
3)The test devices required are as shown in the table below.
|
DSA800 、 N5181A 、 53181A 、 N1913A 、 E9304A 、 11667A 、 11713B 、 8494H 、 8496H 、 11716A |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
Feb. 2014 |
|
|
|
|
|
PVD03102-1110 |
|
|
1.6 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
