HMG10 • HMG10P Absolute encoder Profibus DPwith magnetic sensing Mounting and operating instructions
●The encoder HMG10/HMG10P is a precision measurement device for the acquisition of speed/position information for the control of drive units and the provision of electronic output signals for downstream devices.
●The device must not be used for any other purpose. The function of the device is described in this mounting instruction. The customer must check the suitability for the purpose intended.
●Mounting and selection must be executed by authorized and qualified personnel. Mounting, electrical commissioning or any other work with the device or system is to be performed by appropriately qualified staff only.
●Do not put the device into service if there is any visible evidence of damage.
●Do not operate the device beyond the limit values stated in this mounting instruction.
●Any risk of personal injury, damage of the system or company equipment due to failure or malfunction of the device must be eliminated by corresponding safety measures.
●Warning:
■Disregarding intended use could result in serious injury or damage to property.
|
HMG10 、 HMG10P 、 11043628 、 11054917 、 11004078 、 11002915 、 11072795 、 11082677 、 11077197 、 11077087 、 HMG10-B 、 HMG10-T 、 11190106 、 PMG10P |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
08.10.2018 |
|
|
|
|
|
11171695 |
|
|
5 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
