BlueNRG-M2 Very low power application processor module for Bluetooth® low energy v5.0 Data sheet
●Description
■The BlueNRG-M2 is a Bluetooth® low energy system-on-chip application processor certified module, compliant with BT specifications v5.0 and BQE qualified. TheBlueNRG-M2 module supports multiple roles simultaneously and can act at the same time as Bluetooth master and slave device. The BlueNRG-M2 is based on theBlueNRG-2 system-on-chip and entire Bluetooth low energy stack and protocols are embedded into module. The BlueNRG-M2 module provides a complete RF platform in a tiny form factor. Radio, embedded antenna and high frequency oscillators are integrated to offer a certified solution to optimize the time-to-market of the final applications. The BlueNRG-M2 can be powered directly with a pair of AAA batteries or any power source from 1.7 to 3.6 V.
●Features
■Bluetooth v5.0 compliant
▲Supports master and slave modes
▲Multiple roles supported simultaneously
▲LE data packet length extension
■Embedded ST BlueNRG-2 BLE SoC
▲High performance, ultra-low power Cortex-M0 32-bit based core
▲Programmable embedded 256 kB Flash
▲24 kB embedded RAM with data retention
■Embedded BALF-NRG-02D3 integrated matched balun with harmonic filter
■Interfaces:
▲1 x UART, 1 x I2C, 1xSPI, 14 x GPIO, 2 x multifunction timer, 10-bit ADC, watchdog and RTC, DMA controller, PDM stream processor, SWD debug interface
■On-board chip antenna (BLUENRG-M2SA) or PCB antenna (BLUENRG-M2SP)
■Small form factor: 11.5 mm x13.5 mm
■Complemented with Bluetooth low energy protocol stack library (GAP, GATT, SM, L2CAP, LL)
■AES secutity co-processor
■Bluetooth low energy SDK with a wide range of available profiles
■Certification
▲CE qualified
▲FCC, IC modular approval certified
▲TYPE qualified
▲BQE qualified
■Pre-programmed UART bootloader
■Operating supply voltage: from 1.7 to 3.6 V
■Operating temperature range: -40 °C to 85 °C
|
BlueNRG-M2 、 BALF-NRG-02D3 、 BLUENRG-M2SA 、 BLUENRG-M2SP 、 BlueNRG-2 |
|
|
low power application processor module 、 Bluetooth® low energy system-on-chip application processorcertified module 、 Bluetooth low energy application processor modules 、 module |
|
|
[ Bluetooth® low energy v5.0 ][ Internet of Things ][ Smart Home ][ Building ][ industrial automation ][ Smart Lighting ][ Remote ][ access control ][ Fitness ][ wellness ][ sports ][ Consumer medical ][ Security and proximity ][ Assisted living ][ PC ][ smart phone peripherals ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
ECOPACK |
|
|
English Chinese Chinese and English Japanese |
|
|
26 June 2019 |
|
|
Rev 1 |
|
|
DS13053 |
|
|
2.9 MB |
- +1 Like
- Add to Favorites
Recommend
- Rosenberger and STMicroelectronics Cooperate to Develop a Unique High-Speed Contactless Connector Based on 60GHz Wireless Technology
- STMicroelectronics and Sierra Wireless Collaborate to Simplify and Accelerate Connected IoT Solutions Deployment
- MTA Announces Partnership with STMicroelectronics for Smart Tractor
- Eclipse Global Connectivity, Smiths Interconnect and ST Engineering IDirect Collaborate to Deliver a New Airborne ISR SATCOM Capability
- ROHM Group Company SiCrystal and STMicroelectronics Expand Silicon Carbide Wafer Supply Agreement
- Bluetooth gateway and Bluetooth Beacon for Factory Personnel Bluetooth Positioning Solution, Accuracy can Reach 2~3m
- Bluetooth 4.2 vs. Bluetooth 5.0: A Comprehensive Comparison
- Kinghelm‘s KH-6010-A54 Bluetooth Chip Antenna, Providing An Efficient and Stable Signal Transmission Solution for Bluetooth Devices
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
