IQCM-310 OCXO Specification

2022-05-13

●Description:
■The IQCM-310 is a high-performance clock module designed to provide precise frequency, phase and time-of-day synchronization information for telecom and other applications.
■It combines the IEEE 1588-2008 (1588V2) with advanced PTP IC and adaptive timing algorithms which uses 1PPS retrieving from GNSS as a primary time reference. The module supports PTP Grandmaster, PTP Slave and BC.
■Key features
▲Timebase derived from: PTP slave, BITS/SSU input, GNSS
timing satellite signal.
▲PTP Grandmaster: PTP Grandmaster function supports multiple PTP slaves using multicast or unicast messaging.
▲Timebase may be PTP or ARB.
▲PTP Slave: Acting as a PTP Ordinary Clock in Slave mode, IQCM-310 can lock to BCs, or it can use sophisticated packet delay filters and adaptation algorithms to lock to a remote PTP Grandmaster over a multi-hop legacy network which has no PTP support.
■Time-aligned output pair (pads 17, 18): 1 PPS and 125 MHz divided by n (n = 4 to 125000). Maximum of 125MHz (divide by 4); minimum of 100 Hz (divide by 1249999).
■Frequency-aligned outputs: 1 Hz and programmable frequency 1 kHz to 62.5MHz.
■Supports ITU profiles: G.8265.1,G.8275.1, and G.8275.2.
■Clocks: 3 clock inputs and 4 clock outputs.
■Ports: 2xSGMII and 2xUART( 1xTOD).
■Management Interface: UART
■Note1: The IQCM-310 should be left powered and running for 7 days minimum before operation to allow for the OCXO's internal drift to stabilise.
■Note2: The adaptive module algorithm can be built after two days operation with good GPS signal, however this data will be lost at power down.
●Frequency Parameters
■Frequency 10.0MHz
■Recovery Precision 24 Hours (T=±5 Test after Power on 30 min):±50ns max
■Holdover Capability Time 8 hours (T=±5 Test after Power on and lock 2 days): ±1.5μs (Supports external clock with advanced holdover compensation algorithm)

IQD

IQCM-310

More

Part#

OCXOhigh-performance clock module

More

telecom ]

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

10 Jun 19

274 KB

- The full preview is over. If you want to read the whole 7 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: