ADM4168E ±15 kV ESD Protected,Dual RS-422 Transceiver Data Sheet
●GENERAL DESCRIPTION
■The ADM4168E is a dual RS-422 transceiver suitable for high speed communication on point to point and multidrop transmission lines. The ADM4168E is designed for balanced transmission lines and complies with TIA/EIA-422-B.
■The differential driver outputs and receiver inputs feature electro-static discharge (ESD) circuitry that provides protection up to ±15 kV human body model (HBM) and ±8 kV IEC 61000-4-2 (contact and air discharge).
■The ADM4168E operates from a single 5 V power supply. Excessive power dissipation caused by bus contention or output shorting is prevented by short-circuit protection circuitry. Short-circuit protection circuits limit the maximum output current to −150 mA during fault conditions.
■The receivers of the ADM4168E contain a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).
■The ADM4168E is fully specified over the commercial and industrial temperature ranges and is available in a 16-leadTSSOP package.
●FEATURES
■Dual RS-422 transceiver for ESD protection on bus input/output pin,±15 kV HBM,±8 kV IEC 61000-4-2, contact discharge,±8 kV IEC 61000-4-2, air discharge
■Complies with TIA/EIA-422-B and ITU-T recommendation V.11
■Open circuit fail-safe
■Suitable for 5 V power supply application
■Low supply current operation: 9 mA maximum
■Low driver output skew
■Receiver line input resistance: 30 kΩ typical
■Receiver common-mode range: −7 V to +7 V
■Power-up/power-down without glitches
■16-lead TSSOP package
■Operating temperature range: −40°C to +85°C
ADM4168E 、 ADM4168EBRUZ 、 ADM4168EBRUZ-RL7 、 EVAL-ADM4168EEBZ |
|
[ commercial ][ industrial ][ power supply application ][ RS-422 interfaces ][ Point to point and multidrop transmission systems ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TSSOP;RU-16 |
|
English Chinese Chinese and English Japanese |
|
9/17 |
|
Rev.A |
|
D10820-0-9/17(A) |
|
781 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.