HMC602LP4 / 602LP4E 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz
●General Description
■The HMC602LP4(E) Logarithmic Detector/Controller converts RF signals at its input,to a proportional DC voltage at its output.The HMC602LP4(E) employs a successive compression topology which delivers extremely high dynamic range and conversion accuracy over a wide input frequency range.As the input power is increased, successive amplifi ers move into saturation one by one creating an accurate approximation of the logarithm function.The output of a series of square law detectors is summed, converted into voltage domain and buffered to drive the LOGOUT output. For detection mode, the LOGOUT pin is shorted to the VSET input, and will provide a nominal logarithmic slope of -25mV/dB and an intercept of 18 dBm (23 dBm for ƒ > 5.8 GHz). The HMC602LP4(E) can also be used in the controller mode where an external voltage is applied to the VSET pin, to create an AGC or APC feedback loop.
●Features
■Wide Dynamic Range: up to 70 dB
■High Accuracy: ±1 dB with 60 dB Range Up To 6 GHz
■Fast: 10ns Output Response Time
■Supply Voltage: +5V
■Power-Down Mode
■Excellent Stability over Temperature
■Buffered Temperature Sensor Output
■Compact 4x4mm Leadless SMT Package
[ Cellular ][ PCS ][ 3G ][ WiMAX ][ WiBro ][ WLAN ][ Fixed Wireless ][ Radar ][ Power Monitoring ][ Control Circuitry ][ Receiver Signal Strength Indication ][ RSSI ][ Automatic Gain ][ Power Control ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
0209 |
|
v03 |
|
|
|
675 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.