CAT4003B: LED Driver, Constant Current Programmable, with 32 Dimming Levels Product Overview
●The CAT4003B and CAT4004B provide respectively three and four matched low dropout current sources to drive LEDs. The CAT400XB requires no external RSET resistor. The LED current is internally set to 25 mA when the device is first enabled. Each LED channel includes an individual control loop allowing the device to handle a wide range of LED forward voltages while still maintaining tight current matching. The EN/DIM logic input supports the device enable and a digital dimming interface for setting the LED channel current with 32 linear dimming levels. LEDs can be powered directly from a Lithium-ion battery due to the low dropout (75 mV at 20 mA) current sinks. Package options are available in the 4-channel tiny 8-pad UDFN 2 mm x 2 mm with a max height of 0.55 mm, and 3- channel in the 6-lead TSOT-23, TSOP and SC-70.
●Features
■Low Dropout Driver 75 mV at 20 mA
■Dimming via 1-wire EZDimTM Interface
■3, 4 LED Current Sinks with Tight Matching
■32 Dimming Levels
■No Switching Noise
■Shutdown Current less than 1 µA
■25 mA Max LED Current per Channel
■Thermal Shutdown Protection
●Benefits
■Can drive LEDs at lower VIN
■higher resolution dimming
|
[ LCD Display Backlight ][ Mobile Phones ][ Digital Still Cameras ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
TSOT-23;TSOP;SC-70;UDFN |
|
|
English Chinese Chinese and English Japanese |
|
|
8/14/2019 |
|
|
|
|
|
|
|
|
168 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
