DS2105 SCSI Terminator Data Sheet
●Description
■Fast SCSI and Ultra SCSI require the use of active terminations at both ends of every cable segment in aSCSI system with single–ended drivers and receivers.The DS2105 SCSI Terminator, which is fully compliant with these standards, enables the designer to gain the benefits of active termination: greater immunity to volt-age drops on the TERMPWR (TERMination PoWeR)line, enhanced high–level noise immunity, intrinsic TERMPWR decoupling, and very low quiescent current consumption. The DS2105, which integrates a regulator and nine precise switched 110 ohm termination resistors into a monolithic IC, is a functionally compatible version of the DS21S07A. With relaxed output current and termination tolerances, the DS2105 is intended for high volume applications which require active termination but not the high performance of the DS21S07A.The DS2105 is offered in both 300 mil and 150 mil SOIC packages.
●FEATURES
■Fully compliant with SCSI–1, Fast SCSI and UltraSCSI
■Functionally compatible to the DS21S07A, targeted for high volume applications
■Provides active termination for nine signal lines
■Laser–trimmed 110 ohm termination resistors have5% tolerance
■Low dropout voltage
■Power–down mode isolates termination resistors from the bus
■Fully supports actively negated SCSI signals
■Onboard thermal shutdown circuitry
■16–pin plastic SOIC (DS2105)
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SOIC;DIM |
|
|
English Chinese Chinese and English Japanese |
|
|
022698 |
|
|
|
|
|
|
|
|
255 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
