FPGA and SoC Product Catalog Lowest Power, Proven Security, and Exceptional Reliability Catalog
●Whether you’re designing at the board or system level, Microsemi’s SoC FPGAs and low-power FPGAs are your best choice. The unique, flash-based technology of Microsemi FPGAs and their history of reliability sets them apart from traditional FPGAs.
●Design with Microsemi’s FPGAs and SoC FPGAs for today’s rapidly-growing consumer and portable medical device markets, or tomorrow’s environmentally friendly data centers, industrial controls, and military and commercial aircraft. Only Microsemi can meet the power, size, cost, and reliability targets that reduce time-to-market and enable long-term profitability.
●PolarFire FPGAs Deliver Up to 500K Logic Elements, 12.7G Transceivers at 50% Lower Power
▲High-speed serial connectivity with built-in multi-gigabit/multi-protocol transceivers from 250 Mbps to 12.7 Gbps
▲Up to 481K logic elements consisting of a 4-input look-up table (LUT) with a fractureable D-type flip-flop
▲Up to 33 Mbits of RAM
▲Up to 1480 18x18 multiply accumulate blocks with hardened pre-adders
▲Integrated dual PCIe for up to x4 Gen 2 endpoint (EP) and root port (RP) designs
▲High-speed I/O (HSIO) supporting up to 1600 Mbps DDR4, 1333 Mbps DDR3L, and 1333 Mbps LPDDR3/DDR3 memories with integrated I/O gearing
▲General purpose I/O (GPIO) supporting 3.3 V built-in CDR to support SGMII for serial gigabit Ethernet, 1067 Mbps DDR3, and 1600 Mbps LVDS I/O speed with integrated I/O gearing logic
●Reliability Features
▲SEU immune FPGA configuration cells
▲Built-in SECDED and memory interleaving on LSRAMs
▲System controller suspend modefor safety-critical designs
●Security Features
▲Cryptography Research Incorporated (CRI)-patented differential power analysis (DPA) bitstream protection
▲Integrated physically unclonable function (PUF)
▲56 Kbytes of secure eNVM (sNVM)
▲Built-in tamper detectors and countermeasures
▲Integrated Athena TeraFire EXP5200B Crypto Co-processor, Suite B-capable
▲Digest integrity check for FPGA, μPROM, and sNVM
▲True random number generator
▲CRI DPA countermeasure pass through license
●imaging and Video Solution
▲Microsemi provides a complete, easy-to-use development environment for designing low-power and secure video processing applications. The solution includes an IP suite with modular IP, and FPGA mezzanine card (FMC) for the SmartFusion2 advanced development kit, and a software GUI. The IP suite currently supports SmartFusion2 SoC FPGA and IGLOO2 FPGA product families. Support for the PolarFire FPGA product family is currently in development.
▲Key Features
■Modular IP suite
■Support for MIPI CSI-2 or parallel sensor interfaces
■Display interface for 7:1 LVDS or HDMI
■The most secure FPGA to protect your design IP
■Easy-to-use software GUI for real-time audio and video configuration
- +1 Like
- Add to Favorites
Recommend
- Beginning to Innovate Has Never Been Easier——Five-step Approach Help You Quickly Start Developing IoT Applications
- A New Approach to Design a More Efficient Vacuum Cleaner Motor Drive Inverter Using EPC9176 Evaluation Boards
- Module Power Supply Meeting the Power Needs of Modern Technology by Its Modular Approach, High Efficiency, Improved Reliability, Scalability and Compact Design
- Melexis’ New Approach to Dynamic RGB-LED Application Development
- Jowat Receives ISCC PLUS Certification, Able to Manufacture Sustainable Adhesives Following a Mass Balance Approach
- Proactive Threat Simulation to Test Your Cyber Defenses
- Filter Basics about Different Approaches to Q Factor
- Keysight Delivers First Instantly Scalable Zero Trust Test Solution CyPerf 2.0, Taking a Holistic Approach to Help NEMs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.