iC-NT LIGHT CHAIN PULSE DRIVER
●DESCRIPTION
■The iC-NT device is an LED pulse driver for light barrier applications,especially light chain circuitries.
■The device,which is controlled by a shift register logic,features an adjustable LED current sink with a set range of 0.4..1A(at room temperature).For chain circuitries with several transmitters in operation,the internal set of three flipflops enables a secure beam and data shift control,free of race conditions.
■The decrease in LED efficiency with a rise in temperature is almost compensated by a positive temperature coefficient of the current sink.In order to generate steep light pulses,the LED switch off is actively supported by the discharge of its junction capacitance.The duration of this LED short-circuiting is controlled by a monoflop.In the event of a quick follow-up light pulse,a monoflop reset is performed automatically to protect against cross currents.
■The driver stage for the LED output prepares for a light pulse when DIN reads a high signal;synchronized with the CLK leading edge,the first flipflop transfers the DIN data to Q1 and powers up the LED sink.Since the chain is loaded with just one single high bit and DIN is given by the output DOUT of the previous device,input DIN now reads low at the falling edge of CLK.The LED current sink stops the power,at the same time as an internal data shift from Q1 to Q2 occurs.The LED pulse is well-defined by the time difference between two leading edges of the clock signal CLK.The second falling edge of CLK triggers the third flipflop and activates the next device in the chain via DOUT if enabled by SHEN.
■Since only one device is activated at a time,several iC-NT drivers may share one resistor,RSET,to define the LED current value.
■The shift register is reset and the LED current sink is turned off in the event of excessive temperature or undervoltage.Protective diodes to prevent destruction through ESD are also included.The iC-NT device fulfills safety requirements according to IEC 1496-1.An extended temperature range of-20°C..85°C is also available as an option.
●FEATURES
■Adjustable LED pulse operation, set range of 0.4..1A
■Controlled current slew rate enables short light pulses down to 1μs
■LED efficiency degradation compensated by positive current temperature coefficient
■Low standby current; circuit activation by input data
■Low power requirement for external set resistor
■Control logic with 3-step shift register
■Compatible to CMOS levels
■Data output buffer with built-in 120Ωwave impedance adaption
■Single 5V supply
■Thermal shutdown and power-down reset
■ESD protection
■Small outline package SO8
■Suited for high-risk applications according to IEC 1496-1
■Option: Extended temperature range of -20°C..85°C
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2017/11/18 |
|
|
Rev A0 |
|
|
|
|
|
298 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
