iC-DXC DIGITAL SENSOR I/O DRIVER
●DESCRIPTION
■The iC-DXC is a simple I/O circuit capable of driving ohmic, inductive and capacitive loads and features integrated reverse polarity protection.
■The output current is at least 200 mA from a supply voltage of 8 to 30 V.
■With input OE = high the output works as a push-pull driver controlled by pin NIN. If pin NIN is set either to low or high, the output acts as a high-side (PNP) or low-side (NPN) driver respectively, controlled by the input OE.
■Forcing the output pin OUT from his current state is signaled at pin MON. This can be used to implement an IO-Link Wake-Up detection.
■Output transitions are slew-rate limited to reduce interference.
■The output is current limited to 450 mA and short circuit proof by shutting down the driver with excessive temperature.
■A regulated 5 V low power supply is available at pin VOUT to supply external circuitry with up to 10 mA.
●FEATURES
■Configurable high-side, low-side and push-pull operation
■200 mA output current
■I/O-Link compliant
■5μs input filter for spike suppression
■Reverse polarity protection
■Current limited output (< 450 mA)
■Wide supply voltage range from 8 to 30 V
■Driver shut-down with over temperature
■Integrated free-wheeling diode for inductive loads
■Sensor supply voltage output of 5 V at 10 mA
|
[ Digital sensors ][ Light barriers ][ Proximity switches ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2017-05-17 |
|
|
Rev B2 |
|
|
|
|
|
785 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
