SE5007T: 5 GHz Front End Module with Power Detector

2022-03-24

●Product Description
■The SE5007T is a 5GHz front end module offering high linear power for wireless LAN applications. It incorporates a power detector for control of the output power.
■The SE5007T offers a high level of integration for a simplified design, providing quicker time to market and higher application board production yield. The device integrates the input match, inter-stage match, a temperature compensated, load insensitive power detector with 20dB of dynamic range, a 3.8GHz notch filter, a T/R switch and LNA.
■For wireless LAN applications, the device meets the requirements of IEEE802.11a and delivers approximately 17dBm of linear output power. It also features a low linearity mode control to reduce current consumption at low power modes.
■The SE5007T integrates the reference voltage generator, allowing for a true 1.8V CMOS compatible digital EN (enable) function to turn the power amplifier on and off.
●Features
■ 5GHz Front End Module with PA, LNA and T/RSwitch
■ Integrated power amplifier enable pin (VEN)
■ Buffered, temperature compensated powerdetector
■ High and Low-Linearity mode
■ 3% EVM, @17dBm, 64 QAM, 54 Mbps
■ 30 dB Typical Gain
■ Lead Free and RoHS compliant, halogen freepackage
■ 16 pin 3 mm x 3 mm x 0.6 mm QFN, MSL1

SKYWORKS

SE5007TSE5007T-RSE5007T-EK1

More

Part#

Front End Module

More

Access Points ]PCMCIA ]PC cards ]

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

April 3, 2012

Rev 2.0

DST-00383

569 KB

- The full preview is over. If you want to read the whole 11 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: