FXP523.A.07.A.001 Venti WiFi MIMO*3 2.4/5.8GHz Embedded Flexible Antenna

PublishTime：2020-07-14

The unique FXP.523 Venti antenna is a 3-in-1 MIMO, embedded flexible monopole type antenna

for high speed 802.11ac WiFi dual-band applications.

It has over 40% efficiency in the 2.4GHz bands, and over 50% in the 5GHz bands. Featuring a

low profile height of only 0.15mm, the FXP.523 is an ideal solution for

- Gateways

- Routers

- Applications Points

Great care has been taken to have high isolation (at least 15dB) between the three elements to

ensure optimal MIMO system throughput. The antenna has been designed on a flexible material

with a rectangular form-factor and cable connection for an easy installation. The antenna comes

with double-sided 3M tape for easy and robust "peel and stick" mounting. The FXP523 cables

terminate with IPEX (u.fl) connectors for easy installation.

*If needed in order to comply with peak gain restrictions with certain wireless modules, the

antenna peak gain can be reduced by simply using longer cable, or when tested in the actual

device environment.

Many module manufacturers specify peak gain limits for any antennas that are to be connected

to that module. Those peak gain limits are based on free-space conditions. In practice, the peak

gain of an antenna tested in free-space can degrade by at least 1 or 2dBi when put inside a

device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the

module specification to compensate for this effect, giving you better performance.

Upon testing of any of our antennas with your device and a selection of appropriate layout,

integration technique, or cable, Taoglas can make sure any of our antennas’ peak gain will be

below the peak gain limits. Taoglas can then issue a specification and/or report for the selected

antenna in your device that will clearly show it complying with the peak gain limits, so you can

be assured you are meeting regulatory requirements for that module.

SPE-14-8-107/C/WY Page 3 of 18

For example, a module manufacturer may state that the antenna must have less than 2dBi peak

gain, but you don’t need to select an embedded antenna that has a peak gain of less than 2dBi

in free-space. This will give you a less optimized solution. It is better to go for a slightly higher

free-space peak gain of 3dBi or more if available. Once that antenna gets integrated into your

device, performance will degrade below this 2dBi peak gain due to the effects of GND plane,

surrounding components, and device housing. If you want to be absolutely sure, contact Taoglas

and we will test. Choosing a Taoglas antenna with a higher peak gain than what is specified by

the module manufacturer and enlisting our help will ensure you are getting the best

performance possible without exceeding the peak gain limits.

Customized cable lengths and connector versions can be supplied. Contact a Taoglas regional

support center for support.

Brand of Product：	Taoglas
Part#：	FXP523.A.07.A.001 、 FXP.523 、 FXP523 More Part#
Product Category：	Venti antenna More
Application：	[ Gateways ][ Routers ][ Applications Points ] More
Data Type：	Datasheet More
Safety & Environment Standards：	RoHS More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2019/05/23
Version Number：
Data Encoding：	SPE-14-8-107/C/WY
Data Size：	2.1 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 18 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

New Products & Solutions

More>

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits