FXP524.D.07.C.001 Venti WLAN MIMO 2.4/5.0GHz Antenna with 4 ports

2020-01-11
The FXP.524 Venti antenna is a 4-in-1 MIMO, flexible PCB monopole type antenna. The antenna

has excellent efficiency and isolation performance for dual-band WiFi applications. It has over

40% efficiency in the 2.4GHz bands, and over 50% in the 5GHz bands. Featuring a low profile

height of only 0.15mm, the FXP.524 is an ideal solution for maintaining high performance while

fitting into narrow spaces such as plastic enclosures for laptops, tablets, routers, and other WiFi

applications.

The antenna has been designed in a flexible material with a rectangular form-factor and cable

connection for an easy installation. The antenna comes with double-sided 3M tape for easy and

robust "peel and stick" mounting. The antenna cables feature IPEX connectors for easy

installation.

Customized cable lengths and connector versions can be supplied. Contact a Taoglas regional

support center for more information.

Many module manufacturers specify peak gain limits for any antennas that are to be connected

to that module. Those peak gain limits are based on free-space conditions. In practice, the peak

gain of an antenna tested in free-space can degrade by at least 1 or 2dBi when put inside a

device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the

module specification to compensate for this effect, giving you better performance.

Upon testing of any of our antennas with your device and a selection of appropriate layout,

integration technique, or cable, Taoglas can make sure any of our antennas’ peak gain will be

below the peak gain limits. Taoglas can then issue a specification and/or report for the selected

antenna in your device that will clearly show it complying with the peak gain limits, so you can

be assured you are meeting regulatory requirements for that module.

For example, a module manufacturer may state that the antenna must have less than 2dBi peak

gain, but you don’t need to select an embedded antenna that has a peak gain of less than 2dBi

in free-space. This will give you a less optimized solution. It is better to go for a slightly higher

free-space peak gain of 3dBi or more if available. Once that antenna gets integrated into your

SPE-14-8-029/E/CL Page 3 of 19

device, performance will degrade below this 2dBi peak gain due to the effects of GND plane,

surrounding components, and device housing. If you want to be absolutely sure, contact Taoglas

and we will test. Choosing a Taoglas antenna with a higher peak gain than what is specified by

the module manufacturer and enlisting our help will ensure you are getting the best

performance possible without exceeding the peak gain limits.

Taoglas

FXP524.D.07.C.001FXP.524FXP524100112K000033A300513A000002A204511G000002A

More

Part#

Venti antenna

More

laptops ]tablets ]routers ]and other WiFi applications ]

More

Datasheet

More

RoHS

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2019/05/23

SPE-14-8-029/E/CL

2.2 MB

- The full preview is over. If you want to read the whole 19 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: