AH8115 HALL SWITCH LOW CURRENT CONSUMPTION, HIGH SENSITIVITY CMOS HALL IC
designed specifically to meet the requirements of
low-power devices. e.g. as an On/Off switch in
cellular flip-phones, with battery operating voltages
of 2.0V-5.5V.
Precise magnetic switching points and high
temperature stability are achieved through the
unique design of the internal circuit. An onboard
clock scheme is used to reduce the average
operating current of the IC. During the operate phase
the IC compares the actual magnetic field detected
with the internally compensated switching points.
The output Q is switched at the end of each
operating phase. During the Stand-by phase the
output stage is latched and the current consumption
of the device reduced to some μA.
The IC switching behaviour is omnipolar, it can be
switched on with either the north or south pole of a
magnet.
AH8115 is higher sensitivity of magnetic induction
than AH8113, it can be used in security systems、
sensing magnet smaller occasions.
The AH8115 is available in TSOT-23, package.
LOW CURRENT CONSUMPTION, HIGH SENSITIVITY CMOS HALL IC SWITCH |
|
[ Mobile phones ][ Notebook ][ Portable electronic devices ] |
|
Datasheet |
|
ESD (4kV) 、 Halogen free 、 RoHS |
|
Please see the document for details |
|
|
|
|
|
TSOT-23 |
|
English Chinese Chinese and English Japanese |
|
JUN 2013 |
|
REV1.0 |
|
|
|
593 KB |
- +1 Like
- Add to Favorites
Recommend
- AiT A6303 Series——300mA, Positive Voltage Output CMOS LDO Regulators
- 512Kbit I²C Compatible Serial EEPROM AiT A24C512 Requires a Single Power Supply in the Range of 1.7V to 5.5V
- AiT A7545 current mode boost DC-DC converter with Adjustable Output up to 9V and Internal Fixed PWM frequency of 1MHz
- AiT A713 DC-to-DC Step-down Switching Regulator with High Efficiency of up to 95%, ideal for Low-voltage Power Conversions
- AiT Offers Wide Range of Highly Precise SMD/TH Crystal Components in Half Size, Full Size, Cylindrical and Tuning Fork Packages
- AiT Offers Compact SMD Power Inductors Available in SMD Size Range from 0602 to 1812
- AiT offers 1A Linear Li-ion Batteries Charger IC A4051 for Single-cell Lithium-ion Batteries
- AiT‘s A7115B: a 1.5A, 2MHz High Efficiency Buck DC-DC Converter for Powering Portable Equipment
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.