SKY66112-11: 2.4 GHz ZigBee®/Thread/Bluetooth® Smart Front-End Module
●Description:
■The SKY66112-11 is a high-performance, fully integrated RF front-end module (FEM) designed for ZigBee, Thread, and Bluetooth Smart applications.
■The SKY66112-11 is designed for ease of use and maximum flexibility. The device provides an integrated inter-stage matching and harmonic filter, and digital controls compatible with 1.6 V to 3.6 V CMOS levels.
■The RF blocks operate over a wide supply voltage range from 1.8 V to 3.6 V that allows the SKY66112-11 to be used in battery powered applications over a wide spectrum of the battery discharge curve.
■A functional block diagram is shown in Figure 1. The SKY66112-11 is provided in a small, 22-pin, 3.5 mm x 3.0 mm Multi-Chip Module (MCM) package. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1.
●Features:
■Integrated PA with up to +21 dBm output power
■Integrated LNA (2 dB noise figure typical) and bypass path
■Integrated antenna diversity switching for all modes
■Single-ended transmit/receive interface
■Fast switch on/off time: < 800 ns
■Supply range: 1.8 V to 3.6 V
■Sleep mode current: < 1 μA typical
■No external bias resistor is required
■Small MCM (22-pin, 3.5 mm x 3.0 mm x 1.0 mm) package,NiPdAu-plated (MSL3, 260 °C per JEDEC-J-STD-020)
Smart Front-End Module 、 ZigBee®/Thread/Bluetooth® Smart Front-End Module 、 high-performance fully integrated RF front-end module (FEM) 、 fully integrated RF front-end module (FEM) |
|
[ In-home appliances ][ Smart thermostats ][ Internet of Things (IoT) devices ][ Smart lighting ][ Sensors ][ Range extender ][ ZigBee Smart applications ][ Thread Smart applications ][ Bluetooth Smart applications ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
March 14, 2017 |
|
|
|
203225L |
|
1.1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.