S1D13U11 Display Controller S5U13U11 Evaluation Board User Manual
2019-06-11
This manual describes the setup and operation of the S5U13U11 Evaluation Board. This evaluation board is designed as an evaluation platform for the S1D13U11 Display Controller.
The S5U13U11 evaluation board can connect to a variety of embedded CPU boards and a personal computer via USB 2.0. This evaluation board includes a touch screen controller, serial flash ROM and buzzer. This evaluation board can connect to external devices such as LCD panel with touch screen, key matrix circuit, and expansion serial devices via connector.
This manual applies to the following evaluation boards.
• S5U13U11P00C100 (no LCD panel)
• S5U13U11P10C100 (with LCD panel)
The S5U13U11 Evaluation Board includes the following features:
• S1D13U11 Display Controller (144-pin QFP)
• Integrated Silicon Solution, Inc. IS42S16800E-7TLI 128M-bit SDRAM (54-pin TSOP)
• USB mini B connector for S1D13U11 USB2.0 High-speed device port
• Headers for S1D13U11 LCD interface pins
• Built-in Ortustech TFT panel with touch screen (S5U13U11P10C100 only)
• Header for S1D13U11 GPIO, SPI and I²C pins (need to add the connector)
• Resistive type touch screen controller with SPI interface
• 1Mbit serial flash ROM with SPI interface (for configuration data storage)
• Buzzer and Wake-up key
• 24MHz oscillator
• VBUS 5V power input or external DC5V power input can be selected
• Voltage regulator with 1.8V and 3.3V
• Voltage regulator with adjustable 6~24V output, 40mA max., to provide power for LED backlight of LCD panels.
• LED backlight circuit with PWM control
The S5U13U11 evaluation board can connect to a variety of embedded CPU boards and a personal computer via USB 2.0. This evaluation board includes a touch screen controller, serial flash ROM and buzzer. This evaluation board can connect to external devices such as LCD panel with touch screen, key matrix circuit, and expansion serial devices via connector.
This manual applies to the following evaluation boards.
• S5U13U11P00C100 (no LCD panel)
• S5U13U11P10C100 (with LCD panel)
The S5U13U11 Evaluation Board includes the following features:
• S1D13U11 Display Controller (144-pin QFP)
• Integrated Silicon Solution, Inc. IS42S16800E-7TLI 128M-bit SDRAM (54-pin TSOP)
• USB mini B connector for S1D13U11 USB2.0 High-speed device port
• Headers for S1D13U11 LCD interface pins
• Built-in Ortustech TFT panel with touch screen (S5U13U11P10C100 only)
• Header for S1D13U11 GPIO, SPI and I²C pins (need to add the connector)
• Resistive type touch screen controller with SPI interface
• 1Mbit serial flash ROM with SPI interface (for configuration data storage)
• Buzzer and Wake-up key
• 24MHz oscillator
• VBUS 5V power input or external DC5V power input can be selected
• Voltage regulator with 1.8V and 3.3V
• Voltage regulator with adjustable 6~24V output, 40mA max., to provide power for LED backlight of LCD panels.
• LED backlight circuit with PWM control
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
