DF59 Series 2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
▲Features
◆Common to all series
●High Operating Temperature
■DF59’s are rated at temperatures up to 105 ç.
◆DF59
●2. Swing Lock Structure (Wire-to-Board)
■The DF59 features a “swing-lock” mechanism that employs both a positive and friction lock. This helps to prevent accidental unmating by severe wiring and mechanical stress
●Short-Circuit Pin
■The Short-Circuit Pin allows the termination of an open circuit. Typically used at the end of a series of connected circuit boards
●Multi Function Design
■The DF59 has the ability to function as either a Board-to-Wire or Board-to-Board System. The PCB mounted receptacle is designed to mate with the W-to-B, B-to-B, and Short Circuit Pin connectors. This multi function ability allows versatility while keeping connectors to a minimum
●Contact Design
■The terminal design features two-point contact to ensure a highly reliable connection.
●Common Applicator
■Crimping can be performed using the applicator (AP105-DF11-22S) for the existing series DF11-22S C F(A), by replacing the die with the one for DF59 series
■For crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of DF59-22PCFA
◆Common to DF59/59S/59SN
●Floating Structure (Board-to-Board)
■The Board-to-Board connector can be used to connect two PCB together in a co-planar arrangement and features a “Stress free contact” that floats ± 0.5mm in the X, Y and Z dimensions
●Space Savings
■The DF59 series offers high performance in a compact, space saving design; featuring a 2mm pitch and coupled with a mated height of only 2.48mm with AWG#22 cable. The single position floating plugs DF59S and DF59SN are specifically designed to save space, and can be mounted in high density applications
●Robust locking structure on DF59M (W-to-B Connection)
■The lock mechanism on compact DF59M provides 16N horizontal lock strength. (Fig.4)
●Standardization of PCB layout
■The DF59S/SN type is used on board-to-board connections, and the DF59M type is intended for wire-to-board connections. Although they have different receptacles, the PCB mounting pattern can be used for these two types. Different combinations of these connectors can be used in the same system with a common PCB. This allows for standardization of PCB. (Fig.5)
- +1 Like
- Add to Favorites
Recommend
- Renesas Develops Write Technologies for Embedded STT-MRAM Significantly Reducing MCUs Power Consumption in IoT Applications
- ROHM, Mazda, and Imasen Sign a Joint Agreement to Develop Inverters for e-Axle Using ROHM SiC Power Modules
- The Asynchronous General Purpose Timer, Providing RA Microcontrollers with Low Power Timing Solutions
- In 2022, Melexis’ Outperforming Product Lines Were Current Sensors, Embedded Drivers, Magnetic Position Sensors, and Temperature Sensors
- Original & High Quality IMS CS Pigtails Cable Assemblies for Space-Critical Applications
- Kinghelm, A Leading Manufacturer in The Field of Micro Signal Connectors and Plug Components, Has Gained Widespread Popularity in The European and American Markets
- Interpreting The ‘Domestic Replacement‘ of Electronic Components
- CEO of Slkor and Kinghelm Sang Shiqiang‘s Interpretation of the “Domestic Substitution“ of the Electronic Information Industry
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.