NV25080 EEPROM Serial 8-Kb SPI - Automotive Grade 0 Product Overview
●NV25080 are a EEPROM Serial 8-Kb SPI - Automotive Grade 0 (+150°C) devices internally organized as 1Kx8 bits. It features a 32-byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On-Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page which can be permanently write protected.
●Features
■Automotive Temperatures Grade0: -40°C to +150°C/V-CC = 2.5 V to 5.5 V
■SOIC and TSSOP 8-pad Packages
■ 20/ 10 MHz SPI Compatible
■SPI Modes (0,0) & (1,1)
■32-byte Page Write Buffer
■Self-timed Write Cycle
■Hardware and Software Protection
■Block Write Protection
▲Protect ¼, ½ or Entire EEPROM Array
■Low Power CMOS Technology
■200 Year Data Retention
●Benefits
■Allows the use in safety critical application
■Space-Efficient Packaging
|
[ Door module ][ Body computer ][ energy management unit ][ Immobilizer unit ][ Wiper module ][ Park assist unit ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
TSSOP-8;SOIC-8 |
|
|
English Chinese Chinese and English Japanese |
|
|
3/28/2019 |
|
|
|
|
|
|
|
|
175 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
