MLX90371 Triaxis® Position Processor Datasheet
2020-05-07
The MLX90371 is a monolithic sensor sensitive to
the three components of the flux density applied
to the IC (i.e. BX, BY and BZ). This allows the
MLX90371 with the correct magnetic circuit to
decode the absolute position of any magnet
moving in its vicinity (e.g. rotary position from 0
to 360 Degrees or linear displacement, see
Figure 2).
The MLX90371 reports a programmable
ratiometric analog output signal compatible with
any resistive potentiometer or programmable
linear Hall sensor. Through programming, the
MLX90371 can provide a digital PWM (Pulse
Width Modulation) output characteristic.
the three components of the flux density applied
to the IC (i.e. BX, BY and BZ). This allows the
MLX90371 with the correct magnetic circuit to
decode the absolute position of any magnet
moving in its vicinity (e.g. rotary position from 0
to 360 Degrees or linear displacement, see
Figure 2).
The MLX90371 reports a programmable
ratiometric analog output signal compatible with
any resistive potentiometer or programmable
linear Hall sensor. Through programming, the
MLX90371 can provide a digital PWM (Pulse
Width Modulation) output characteristic.
- +1 Like
- Add to Favorites
Recommend
More>
- Melexis MLX90371——Gen III Triaxis® Rotary and Linear Position Sensor IC (Analog or PWM Output)
- Stray Field Immunity in Melexis MLX90425 DMP Variant Supports Vehicle Electrification
- Melexis Squeezes Ultimate Performance in a Tiny 3D Magnetometer MLX90394
- Melexis Reveals Compact, Low-Voltage 3D Magnetometer MLX90392 for Consumer Applications
- Melexis MLX90374——Gen III Triaxis® Rotary and Linear Position Sensor IC with Dual Output
- Melexis introduced the MLX90397 3D magnetometer optimized for battery powered applications
- Melexis Announces Latest Triaxis® Position Sensor with New PCB-less Packages
- Melexis Redefines Thermographic Sensing with the MLX90642 32x24 IR Array
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.