MCM6341 128K x 24 Bit Static Random Access Memory SEMICONDUCTOR TECHNICAL DATA
The MCM6341 is a 3,145,728–bit static random access memory organized as 131,072 words of 24 bits. Static design eliminates the need for external clocks or timing strobes.
The MCM6341 is equipped with chip enable (E1, E2, E3) and output enable(G) pins, allowing for greater system flexibility and eliminating bus contention problems.
The MCM6341 is available in a 119–bump PBGA package.
●Single 3.3 V Power Supply
●Fast Access Time: 10/11/12/15 ns
●Equal Address and Chip Enable Access Time
●All Inputs and Outputs are TTL Compatible
●Three–State Outputs
●Power Operation: 280/275/270/260 mA Maximum, Active AC
●Commercial Temperature (0°C to 70°C) and Industrial Temperature (–40°C to 85°C) Options
MCM6341 、 MCM6341ZP10 、 MCM6341ZP11 、 MCM6341ZP12 、 MCM6341ZP15 、 SCM6341ZP10C 、 SCM6341ZP11A 、 SCM6341ZP12A 、 SCM6341ZP15A 、 MCM6341–10 、 MCM6341–11 、 MCM6341–12 、 MCM6341–15 、 MCM6341XXXXXX |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
PBGA |
|
English Chinese Chinese and English Japanese |
|
REV 8 |
|
10/6/99 |
|
MCM6341/D |
|
571 KB |
- +1 Like
- Add to Favorites
Recommend
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- AEC-Q100 Qualified Clock Generator Adopted on NXP S32G Automotive Network Processor Reference Design
- Unleashing the Potential of i.MX 8M Mini in Industrial and Medical Applications
- China Requires Automobile Manufacturers to Increase the Proportion of Domestic Chip Procurement
- C-V2X Certification – Necessary or Just Nice to Have?
- Runic Technology Participates in the 2021 ASPENCORE Double Summit
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.