MC9S08PA4 Data Sheet,NXP Semiconductors Technical Data

PublishTime：2022-07-27

●Key features
■ 8-Bit S08 central processor unit (CPU)
◆ Up to 20 MHz bus at 2.7 V to 5.5 V across operating temperature range
◆ Supporting up to 40 interrupt/reset sources
◆ Supporting up to four-level nested interrupt
◆ On-chip memory
◆ Up to 4 KB flash read/program/erase over full operating voltage and temperature
◆ Up to 128 byte EEPROM; 2-byte erase sector; program and erase while executing flash
◆ Up to 512 byte random-access memory (RAM)
◆ Flash and RAM access protection
■ Power-saving modes
◆ One low-power stop mode; reduced power wait mode
◆ Peripheral clock enable register can disable clocks to unused modules, reducing currents; allows clocks to remain enabled to specific peripherals in stop3 mode
■ Clocks
◆ Oscillator (XOSC) - loop-controlled Pierce oscillator; crystal or ceramic resonator range of31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz
◆ Internal clock source (ICS) - containing a frequency-locked-loop (FLL) controlled by internal or external reference; precision trimming of internal reference allowing 1% deviation across temperature range of 0°C to 70 °C and 2% deviation across whole operating temperature range; up to 20 MHz
■ System protection
◆ Watchdog with independent clock source
◆ Low-voltage detection with reset or interrupt; selectable trip points
◆ Illegal opcode detection with reset
◆ Illegal address detection with reset
■ Development support
◆ Single-wire background debug interface
◆ Breakpoint capability to allow three breakpoints setting during in-circuit debugging
◆ On-chip in-circuit emulator (ICE) debug module containing two comparators and nine trigger modes
■ Peripherals
◆ ACMP - one analog comparator with both positive and negative inputs; separately selectable interrupt on rising and falling comparator output; filtering
◆ ADC - 8-channel, 12-bit resolution; 2.5 μs conversion time; data buffers with optional watermark; automatic compare function; internal bandgap reference channel; operation in stop mode; optional hardware trigger
◆ FTM - Three 2-channel flex timer modulators modules; 16-bit counter; each channel can be configured for input capture, output compare, edge-or center-aligned PWM mode
◆ RTC - 16-bit real timer counter (RTC)
◆ SCI - one serial communication interface (SCI/UART) modules optional 13-bit break; full duplex on-return to zero (NRZ); LIN extension support
■ Input/Output
◆ Up to 18 GPIOs including one output-only pin
◆ One 8-bit keyboard interrupt module (KBI)
◆ Two, ultra-high current sink pins supporting 20 mAsource/sink current
■ Package options
◆ 20-pin SOIC
◆ 20-pin TSSOP
◆ 16-pin TSSOP
◆ 8-pin DFN
◆ 8-pin SOIC

Brand of Product：	NXP
Part#：	MC9S08PA4 、 MC9S08PA4(A) 、 S08 More Part#
Product Category：	More
Application：	More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：	20-pin SOIC;20-pin TSSOP;16-pin TSSOP;8-pin DFN;8-pin SOIC
Language：	English Chinese Chinese and English Japanese
Date of Creation：	08/2018
Version Number：	Rev. 8
Data Encoding：	MC9S08PA4
Data Size：	994 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 29 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

New Products & Solutions

More>

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits