LPC5411x 32-bit ARM Cortex-M4/M0+ microcontroller Product data sheet
●General description
■The LPC5411x are ARM Cortex-M4 based microcontrollers for embedded applications. These devices include an ARM Cortex-M0+ coprocessor, up to 192 KB of on-chip SRAM, up to 256 KB on-chip flash, full-speed USB device interface with Crystal-less operation, a DMIC subsystem with PDM microphone interface and I2S, five general-purpose timers, one SCTimer/PWM, one RTC/alarm timer, one 24-bit Multi-Rate Timer (MRT), a Windowed Watchdog Timer (WWDT), eight flexible serial communication peripherals (each of which can be a USART, SPI, or I2C interface), and one 12-bit 5.0 Msamples/sec ADC, and a temperature sensor.
■The ARM Cortex-M4 is a 32-bit core that offers system enhancements such as low power consumption, enhanced debug features, and a high level of support block integration. The ARM Cortex-M4 CPU incorporates a 3-stage pipeline, uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals, and includes an internal prefetch unit that supports speculative branching. The ARM Cortex-M4 supports single-cycle digital signal processing and SIMD instructions. A hardware floating-point unit is integrated in the core.
■The ARM Cortex-M0+ coprocessor is an energy-efficient and easy-to-use 32-bit core which is code and tool-compatible with the Cortex-M4 core. The Cortex-M0+ coprocessor offers up to 100 MHz performance with a simple instruction set and reduced code size.
LPC5411x 、 LPC54113J256UK49 、 LPC54114J256UK49 、 LPC54113J128BD64 、 LPC54113J256BD64 、 LPC54114J256BD64 |
|
32-bit ARM Cortex-M4/M0+ MCU 、 192 KB SRAM 、 256 KB flash, Crystal-less USB operation, DMIC subsystem, Flexcomm Interface, 32-bit counter/ timers, SCTimer/PWM, 12-bit 5.0 Msamples/sec ADC, Temperature sensor |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
WLCSP49;LQFP64;SOT314-2;SOT1444-5 |
|
English Chinese Chinese and English Japanese |
|
9 May 2018 |
|
Rev. 2.1 |
|
LPC5411x v.2.1 |
|
5.7 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.