CD1030 33 channel multiple switch detection interface with programmable wetting current
●The CD1030 is designed to detect the closing and opening of up to 33 switch contacts. The switch status, either open or closed, is transferred to the microprocessor unit (MCU) through a serial peripheral interface (SPI). This SMARTMOS device also features a 35-to-1 analog multiplexer for reading the input channels as analog inputs. The analog selected input signal is buffered and provided on the AMUX output pin for the MCU to read.Independent programmable wetting currents are available as needed for the application. A battery and temperature monitor are included in the IC and available via the AMUX pin.
●The CD1030 device has two modes of operation, Normal and Low-power mode (LPM). Normal mode allows programming of the device and supplies switch contacts with pull-up or pull-down current as it monitors the change of state on the switches. The LPM provides low quiescent current, which makes the CD1030 ideal for automotive and industrial products requiring low sleep-state currents.
●Features
■ Fully functional operation 4.5V ≤ VBATP ≤ 36V
■ Full parametric operation 6.0V ≤ VBATP ≤ 28V
■ Operating switch input voltage range from -1.0V to 36V
■ 12 programmable inputs (switches to battery or ground)
■ 21 switch-to-ground inputs
■ Selectable wetting current (2.0, 6.0, 8.0, 10, 12, 14, 16, or 20mA)
■ Interfaces directly to an MCU using 3.3V / 5.0V SPI protocol
■ Selectable wake-up on change of state
■ Typical standby current IBATP = 50μA and IDDQ = 10μA
■ Active interrupt (INT_B) on switch state change
■ Integrated battery and temperature sensing
|
[ Automotive ][ Heating ventilation and air conditioning ][ Lighting ][ Central gateway ][ in-vehicle networking ][ Gasoline engine management ][ Industrial ][ Programmable logic control ][ Process control ][ temperature control ][ Input-output control ][ Single board computer ][ Ethernet switch ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
48-PIN LQFP-EP;LQFP 48;98ASA00173D |
|
|
English Chinese Chinese and English Japanese |
|
|
7/2018 |
|
|
Rev. 5.0 |
|
|
CD1030 |
|
|
3.6 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
