ST25DV02K-W1 ST25DV02K-W2 Dynamic NFC/RFID tag IC with 2-Kbit EEPROM with up to 2x pulse width modulation outputs

2022-08-10

■ FEATURES
● Pulse width modulation outputs
▲ Up to 2x independent outputs
◆ 1x PWM output with ST25DV02K-W1
◆ 2x PWM outputs with ST25DV02K-W2
▲From 488 Hz to 31250 Hz
▲62.5 ns pulse width resolution:
◆ from 15-bit resolution at 488 Hz
◆ to 9-bit resolution at 31.25 kHz
▲Accuracy: ±10% over temperature range
▲No need for external oscillator
▲Supply voltage from 1.8 V to 5.5 V, independent from contactless interface
▲Independent push-pull outputs
- Up to 4 mA drive capability per output
- Adjustable output drive for low power and low noise application
▲Live update of PWM parameters controlled by contactless interface
● Contactless interface
▲Based on ISO/IEC 15693 and NFC Forum Type 5 Tag
▲Supports all ISO/IEC 15693 modulations, coding, sub-carrier modes and data rates
▲Single and multiple blocks read
▲Internal tuning capacitance: 28.5 pF
● Memory
▲2-kbits of EEPROM
▲Accessible in blocks of 4x bytes
▲5 ms typical write time (one block)
▲Data retention: 40 years
▲Write cycles endurance: 100k write cycles at 85 °C
● Data protection
▲Up to 4 independent areas, including the PWM control area, with flexible protection mechanism based on 32/64-bits passwords
▲System configuration: write protection by 32-bit password
▲TruST25™ Digital signature mechanism for authentication
● Temperature range
▲From -40 °C to +85 °C (Contactless interface)
▲From -40 °C to +105 °C (PWM interface)
● Package
▲8-pin packages
▲ECOPACK2e (RoHS compliant)

ST

ST25DV02K-W1ST25DV02K-W2ST25DV02K-W1R8S3

More

Part#

Dynamic NFC/RFID tag IC

More

More

Datasheet

More

More

Please see the document for details

More

More

SO8N;TSSOP8

English Chinese Chinese and English Japanese

July 2018

Rev 4

DS12114

2.4 MB

- The full preview is over. If you want to read the whole 80 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: