TP3232N/TP3222N Microamp Supply-Current, 3Vto 5.5V, Up to 470kbps RS-232 Transceivers

2021-03-16

The 3PEAK TP32xxN devices are 3.0V to 5.5V RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC= 3.0V. Each receiver converts TIA/RS-232-F inputs to TTL/CMOS levels.
The devices have a typical threshold of 1.26V, a typical hysteresis of 0.5V, and can accept ±25V inputs. Data rates greater than 470kbps are guaranteed at worst case load conditions. The devices are fully compatible with 3.3V-only systems, mixed 3.3V and 5.0V systems, and5.0V-only systems.
The TP3232N/TP3222N has two receivers and two transmitters. The TP3222N features a 1μA shutdown mode that reduces power consumption in battery powered portable systems. The TP3222Nreceivers remain active in shutdown mode, allowing monitoring of external devices while consuming only 1μA of supply current.
Features:
●Meets EIA/TIA-232 and V.28/V.24 Specifications at 3V.
●Two Drivers and Two Receivers.
●Constant Date Rate Under Different C-Loading.
●Operates Up to 470kbps.
●On-Chip Voltage Converters Require Only Four External 0.1μF Capacitors.
●Wide Power Supply Range: Single +3V to +5.5V.
●1μA Low Power Shutdown With Receivers Active(TP3222N).
●Drop-in Replacements for SP3232,SP3222, MAX3232,MAX3222.
●TP3232N is a Low Power Upgrade for 5V HIN232,HIN202,MAX232, MAX242.

3PEAK

TP3232NTP3222NTP3232N-SRTP3232N-TRTP3222N-SR

More

Part#

RS-232 Transceivers

More

Battery-Powered Equipment ]Cell Phones ]Smart Phones ]Cell-Phone Data Cables ]Notebook ]Subnotebook ]Palmtop Computers ]Printers ]xDSL Modems ]

More

Datasheet

More

More

Please see the document for details

More

More

16-Pin SOIC;16-Pin TSSOP;18-Pin SOIC

English Chinese Chinese and English Japanese

2017/12/25

Rev. B.01

1.2 MB

- The full preview is over. If you want to read the whole 12 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: