The Protection Application of Self Recovery Fuses in Sweepers

PublishTime： 2024-01-20 Article Source：XC News Author：XC Electronics (Shenzhen) Co.,Ltd.

With the rapid development of modern technology, a large number of products can only be integrated into our daily lives, and the broom is one of them. As a smart home product, floor sweepers are not uncommon in first tier cities in China. The working principle of a floor sweeper is not too difficult to understand, mainly relying on the drive of internal small motors to provide power. Due to unstable voltage or jamming during operation, the motor may encounter problems such as rotor blockage, overload, or even burning out. So the internal motor must be designed with corresponding protection circuits to ensure its reliability and stability of operation.

There are many types of protection methods for small motors inside the sweeping machine. Previously, bimetallic temperature controllers were commonly used. When the motor was working, if the coil temperature increased, the circuit would be disconnected, and after the temperature decreased, it would be connected again. However, this method has a drawback, which is that after repeatedly connecting and disconnecting the power supply, the service life of the motor will be greatly reduced. In addition, some unscrupulous manufacturers try to save costs, Using aluminum or copper wires as coil wires, the motor heats up faster during operation, further shortening its service life. So, choosing the most protective material is the top priority. We suggest that you use PPTC as a protective device for small motors.

The PPTC self recovery fuse is very comprehensive in protecting the motor. It has a protective effect on both temperature and current above the set value, and its sensing speed for internal temperature and current changes in the motor is much faster than that of metal temperature controllers.

Once eXCeeding the limit is detected, PPTC will immediately activate the protection function, limiting the current of the motor circuit, in order to achieve the best protection purpose. PPTC will only self recover when the power supply is cut off or the fault is repaired, and continuous power supply will not self recover. This perfectly solves the potential danger of temperature reduction and repeated work burning the motor, while ensuring the accuracy of motor equipment protection.

Fig.1

+1 Like
Add to Favorites

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Recommend

What is the Function of Patch Self Recovery Fuses

2023-12-28 - Design Article Some industry newcomers, may not know the definition and function of patch fuses. Patch self recovery fuses are used to protect electronic devices from damage in the event of circuit abnormalities, greatly reducing damage. A common fuse is a fusible fuse inside a light bulb, so what is a patch self recovery fuse? According to the literal meaning, it can automatically restore to a normal state. What is the function of a patch self recovery fuse?

What is A Self Recovery Fuse

2023-12-05 - Design Article Self recovery fuse is an overcurrent electronic protection component that uses a polymer organic polymer under high pressure, high temperature, and sulfurization reaction conditions.After mixing with conductive particle materials, it is processed through a special process. Habitually applying PPTC (Polymer Positive Temperature).

Explanation of Parameters in the PPTC Specification for Self Healing Fuses

2024-08-21 - Technical Discussion This is very simple. As long as you know the meaning represented by the parameters in the specification book, you can clearly and quickly view the PTC specification book for self recovery fuses.

Applications of Self Recovery Fuse Parameters

2023-12-20 - Design Article The self recovery fuse is connected in series in the DC/AC power circuit. DIP direct insertion or SMD surface mount can be selected PPTC has no positive or negative polarity. As PPTC is in a protected state and has a high surface temperature, it should be installed in a ventilated state.

Usage and Precautions for Self Restoring Fuses

2023-12-24 - Design Article Among the technical indicators of PPTC, one is Vmaxi, which represents the maximum voltage that the self recovery fuse protector can withstand in a blocked state. That is to say, in a circuit where the self recovery fuse is connected in series, when the current of the circuit is abnormal, the self recovery fuse will jump from low resistance to high resistance within a certain time range, thereby preventing the flow of abnormal large current and protecting the subsequent circuit from being damaged by large current.

The Application of Self Recovery Fuses in Automotive USB Systems

2024-01-18 - Technical Discussion Nowadays, cars generally come with USB 3.0 ports. In addition to overcurrent and overvoltage protection, sensitive electronic devices using high-speed interfaces such as USB and HDMI also require electrostatic discharge (ESD) protection. Three different types of circuit protection devices can help avoid these potential destructive events.

What are the Standard Requirements for Self Restory Fuse Technology?

2023-11-27 - Design Article Self recovery fuse is a type of overcurrent electronic protection component, which is made by mixing conductive particle materials with polymer organic polymers under high pressure, high temperature, and vulcanization reaction conditions, and processed through special processes. What are the standard requirements for self restoring fuse technology? 1. The rated zero power resistance PPTC thermistor should be packaged in different levels according to the zero power resistance, and the resistance range should be indicated on the outer packaging.

产品手册（Product Catalogue）

公司介绍 Company Profile 温控器 Thermostat 保险丝 Fuses 企业资质与专利 Qualification and Patents Certifications

2014/11/25 - Selection guide C0015302Z,9K7.SK-B5,KSD305系列,9K7.SK-B3,CG-B,CG-A,SK-B1系列,9K7CG-XXX,SK-B5系列,KSD301系列,KSD307B,SK-A1,KSD307 SERIES,SK-A4,C0015301Z,9K7.SK-C2,SK-C2系列,C0025302Z,C4000302Z,KT SERIES,9K7.JW-A072,C2000302Z,CG-B系列,C0080303Z,9K7.SK-B11,JW-C系列,KSD305B,JW,KSD305-XXXX/XXXX,SK-C2,9K7SK-XXXX/XXXXX,C4000301Z,C5000301Z,SK,CG SERIES,9K4307-XXXX/XXXX,C0020302Z,CG,KT,KSD9700 SERIES,SK-B1,C5000302Z,C1000302Z,C0050303Z,SK-B5,C0035302Z,C0020303Z,C0040302Z,KSD307系列,KSD301-XXX/XXXXXX/XXX,9K7KT-XXXX/XXXXX,9K7.SK-F3,SK-F5系列,JW-B系列,C0060303Z,KSD9700,C0030301Z,KT系列,C7500301Z,C0070303Z,C0040303Z,SK-A1系列,9K9.9700-XXXXXXX,KSD305,KSD307,KT-A2,KT-A1,KSD301,C0030302Z,JW SERIES,JW系列,C0020301Z,C7500302Z,C0010302Z,9K4.307B,JW-A系列,CG-A1,C0025301Z,CG系列,KSD9700系列,C3000301Z,C2000301Z,C0030303Z,KT-A系列,SK SERIES,JW-B,JW-C,SK系列,KSD301 SERIES,KSD305 SERIES,CG-B2,C0010301Z,SK-F5,C3000302Z,SK-F6,9K7JW-XXXX,CG-A系列,KSD307-XXXX/XXXX,KT-A,9K4.307

Doingter is committed to the development, production and sales of power semiconductors,Doingter products are widely used in consumer electronics, appliances, sweepers, wireless chargers, electric tools, BMS, electrical vehicles, power supplies, adapters, etc.