Do the Pellistor sensors have safety approvals?

Do the Pellistor sensors have safety approvals?
Published：2024-07-14

Write a reply

answer(s)

用户_5489 (0)

some pellistors sensors do have safety approvals. Refer to datasheets and/or Approval certificates.

Published：2024-07-14

+1 Like
Add to Favorites

Recommend

Do the Pellistor sensors have Intrinsic Safety approvals?

2024-07-30 - 技术问答 The MPEL is certified ExIa, all other pellistors do not have an intrinsic safety approval.

Do the Infrared sensors have safety approvals?

2024-07-30 - 技术问答 Some infrared sensors do have safety approvals. Refer to datasheets and/or Approval Certificates.

Do the Metal Oxide Semiconductor sensors have safety approvals?

2024-07-30 - 技术问答 No.

Do the Electrochemical sensors have safety approvals?

2024-07-30 - 技术问答 No.

Do the Infrared sensors have Intrinsic Safety approvals?

2024-07-30 - 技术问答 Certain types are Intrinsically Safe for mining (methane only). Refer to Datasheets for more information.

What are the recommended storage conditions for a Pellistor sensor?

2024-07-30 - 技术问答 Sensors are not sensitive to storage temperature. See individual datasheets.

How much Oxygen do Pellistor sensors need to function correctly?

2024-07-30 - 技术问答 More than 12% oxygen needs to be present in the sample stream.

How to Check UL Certification for TNR™ Ceramic Varistors

2024-08-30 - 技术问答 Details about UL certification can be found on the UL website which you can reach by following the link below acquired safety standards on each individual product page.

What is the Pellistor sensor temperature performance?

2024-07-30 - 技术问答 All sensors will show a change in sensitivity (and in some cases zero) with temperature. For more specific information please refer to the relevant datasheet and application note.

What substances can kill a Pellistor sensor?

2024-07-30 - 技术问答 See Pellistor Application Note 6

How to Check CQC Certification for TNR™ Ceramic Varistors

2024-08-30 - 技术问答 Details about CQC certification can be found on the CQC website which you can reach by following the link at the bottom of the acquired safety standards on each individual product page.

What are the recommended power requirements for a Pellistor sensor?

2024-07-30 - 技术问答 See individual datasheets. The sensors are run in a Wheatstone bridge circuit either in constant voltage or current mode.

What are the recommended storage conditions for a Infrared sensor?

2024-07-30 - 技术问答 Sensors are not sensitive to storage temperature. See individual datasheets.

How to Check VDE Certification for TNR™ Ceramic Varistors

2024-08-30 - 技术问答 Details about VDE certification can be found on the VDE website which you can reach by following the link below acquired safety standards on each individual product page.（https://www.vde.com/tic-en/marks-and-zertificates/vde-approved-products/search）

Can Pellistor sensors withstand exposure to the target gas for long periods?

2024-07-30 - 技术问答 This depends on the level and duration. The longer and higher the concentration, the greater the degree of zero drift and change in (net) sensitivity. The latter is usually a decrease in sensitivity.