Photo MOSFET Solid-state Relay Features High Output Withstand Voltage of 600V and Current Rating of 100mA

2021-06-27 Hualian Electronics
Photo MOSFET Solid-state Relay,HSSR-S1A04-2,Photo MOSFET Solid-state Relay,HSSR-S1A04-2

The Photo MOSFET Solid-state Relay HSSR-S1A04-2 consists of an AlGaAs infrared emitting diode input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay action with a minimum input current of 5mA through the input LED. The relay reset with an input voltage of 0.8V or less.


Figure 1-Product


Features

● Micro Photo MOSFET Solid State Relay

● Single Channel Normally on Single-Pole-Single-Throw (SPST) Relay 

● 600V Output Withstand Voltage 

● 100mA Current Rating 

● Low Input Current: CMOS Compatibility 

● High-Speed Switching: 0.5ms (Ton), 0.2ms (Toff ) Typical 

● High Input-to-Output Insulation Voltage: 3750 Vrms for 1 min


Applications

● Telecommunication Switching 

● Data Communications 

● Battery management 

● Industrial Controls 

● Medical equipment 

● EMR / Reed Relay Replacement


Schematic Diagram

Figure 2-Schematic

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: