Why does EFR32 part appear CRC error sometimes and how to solve the problem?
- 创建于2020-05-06
1answer(s)
-
- (0)
- Sometimes we may see EFR32 part appears CRC error if enabling CRC function, it‘s maddening.The reason is radio‘s physical detecting algorithm.When EFR32 part is receiving a packet with all‘s 1 or all‘s 0 payload, it couldn‘t detect the bits correctly if the packet is long because of its physical detecting algorithm. The solution is to enable whitening so that the data payload in the air will not be all‘s 1 or all‘s 0.
- Published:2020-05-06
- +1 Like
- Add to Favorites
Recommend
More>
- Wirepas Mesh 2.4GHz Firmware v5.4 and Silicon Labs EFR32MG24: A Powerful Combination for IoT Applications
- Silicon Labs Multiprotocol Wireless SoCs EFR32MG24 Team up with Wirepas to Expand Industrial Mesh Network Solutions
- Unlocking Wireless Home Security Capabilities with Wyze Lock Bolt smart door lock that is based on Silicon Labs’EFR32MG21 2.4GHz Wireless SoC
- Wirepas and the Silicon Labs’ EFR32FG23 Sub-GHz SoC are taking on India’s Smart Metering Challenge
- EFR32BG22 Wireless SoC Enables IoT Devices to Operate 10+ Years on 1 Conin Cell Battery | Silicon Labs
- EFP01 Energy Friendly PMIC provides complete system power and primary cell battery Coulomb counting for EFM32 and EFR32 devices
- Introducing the EFM8BB50: A New Addition to SILICON LABS 8-bit MCU Family
- Silicon Labs and Wirepas Enable IoT for Asset Tracking and Building Automation