Package
51 pin S-LGA (Soldered Land Grid Array): 4.5 x 4.5 x 1.0 mm, 0.04 g
Pinout
Legal Notice
u-blox reserves all rights to this document and the information contained herein. Products, names, logos
and designs described herein may in whole or in part be subject to intellectual property rights. Reproduc-
tion, use, modification or disclosure to third parties of this document or any part thereof without the
express permission of u-blox is strictly prohibited.
The information contained herein is provided “as is” and u-blox assumes no liability for the use of the
information. No warranty, either express or implied, is given, including but not limited, with respect to the
accuracy, correctness, reliability and fitness for a particular purpose of the information. This document may
be revised by u-blox at any time. For most recent documents, visit www.u-blox.com.
Copyright © 2017, u-blox AG
Environmental data, quality & reliability
Operating temp. –40 °C to +85 °C
RoHS compliant (lead-free)
Qualification according to standard JESD47 / ISO 16750
Uses u-blox M8 chips qualified according to AEC-Q100
Moisture sensitivity level 3
Features
Receiver type 72-channel u-blox M8 engine
GPS/QZSS L1 C/A, GLONASS L10F
BeiDou B1I, Galileo E1B/C
SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
Max nav. update rate
1
Single GNSS: up to 18 Hz
2 Concurrent GNSS: up to 10 Hz
Accuracy
2
2.0 m CEP
Acquisition
2
Cold starts: 26 s
Aided starts: 2 s
Reacquisition: 1 s
Sensitivity
2
Tracking & Nav: –167 dBm
Cold starts: –148 dBm
Hot starts: –157 dBm
Assistance GNSS AssistNow GNSS Online
AssistNow GNSS Offline (up to 35 days)
AssistNow Autonomous
(up to 6 days)
OMA SUPL & 3GPP compliant
Oscillator TCXO
RTC crystal Optional, can be connected to external
RTC Clock
DC/DC converter Optinal only in ZOE-M8Q for low
power, requires external components
Anti jamming Active CW detection and removal. Extra
onboard SAW band pass filter
Memory ROM
SQI Flash FW update
(optional) for AssistNow Offline, AssistNow Autonomous
Data logging
Supported antennas Active and passive
Raw Data Code phase output
Odometer Integrated in navigation filter
Geofencing Up to 4 circular areas
GPIO for waking up external CPU
Spoofing detection Built-in
Signal integrity Signature feature with SHA 256
Data-logger
3
For position, velocity, time, and
odometer data
Electrical data
Supply voltage 1.71 V to 1.89 V (ZOE-M8G)
2.7 V to 3.6 V (ZOE-M8Q)
Power consumption
2
ZOE-M8G: 40 mA @ 1.8 V (Continuous)
ZOE-M8Q
4
: 25 mA @ 3.0 V (Continuous)
Backup Supply 1.4 to 3.6 V
1
ROM
2
Default mode: GPS/SBAS/QZSS+GLONASS
3
External Flash required
4
with DC/DC
Support products
u-blox M8 Evaluation Kits:
Easy-to-use kits to get familiar with u-blox M8 positioning
technology, evaluate functionality, and visualize GNSS performance.
EVK-M8GZOE u-blox M8 Concurrent GNSS Evaluation Kit,
supports ZOE-M8G and ZOE-M8Q
UBX-16005908 - R07 www.u-blox.comEarly Production Information
Product variants
ZOE-M8G u-blox M8 concurrent GNSS SiP, 1.8 V,
S-LGA, TCXO, ROM, SAW, LNA
ZOE-M8Q u-blox M8 concurrent GNSS SiP, 3.0 V,
S-LGA, TCXO, ROM, SAW, LNA
Further information
For contact information, see www.u-blox.com/contact-us.
For more product details and ordering information, see the
product data sheet.
Interfaces
Serial interfaces 1 UART
1 SPI (optional)
1 DDC (I
2
C compliant)
1 SQI interface (for optional Flash)
Digital I/O Configurable timepulse
1 EXTINT input
Timepulse Configurable 0.25 Hz to 10 MHz
Protocols NMEA, UBX binary, RTCM
Standard
Automotive
Professional