For further information contact your local STMicroelectronics sales office.
September 2017 DocID030823 Rev 2 1/3
STSW-ST25RU002
PC software source for ST25RU3993-EVAL board
Data brief
Features
• The ST25RU3993-EVAL board is a Gen2
compliant Rain reader demonstration board
and is composed, among other parts, of an
ST25RU3993 (high performance Rain reader)
and an STM32L4 microcontroller.
• The ST25RU3993-EVAL board is controlled by
the PC-based software and is connected
through a USB/UART bridge.
• The software supports the following RF
protocols and features:
– EPC Class 1 Gen2
(ISO 18000-63)
– ISO 18000-61 in direct mode
– ISO 18000-62 in direct mode
– Carrier cancellation
– ST25RU3993 register access
– Inventory with auto acknowledge
– RSSI display
– RSSI mode selection
– Frequency profile selection
– Automatic supply voltage control
– Transmit power control
– Internal and external PA selection
– Carrier sense mode
– Data rate selection
– Sensitivity control
– Automatic antenna port switching
– Anti-collision slot management
– CW and continuous modulation mode
– Direct commands
– RSSI and reflected power sweeps
– Tag access
– Generic tag command tool
– Function assignment to tag read
– Saving and recalling configurations
Description
The STSW-ST25RU002 software comprises the
ST25RU3993 GUI (Graphical User Interface)
source, which is a Windows
®
PC-based
application, to control the corresponding
ST25RU3993-EVAL board.
It connects to the ST25RU3993-EVAL board
through a USB/UART bridge and communicates
with the firmware. The project provided is ready to
be compiled using the QT5 toolchain.
www.st.com
