SGM2588
Power Distribution Switch
SG Micro Corp
www.sg-micro.com
DECEMBER 2017 – REV. A. 2
GENERAL DESCRIPTION
The SGM2588 is an integrated 100mΩ (TYP) power
switch for self-powered and bus-powered Universal
Series Bus (USB) applications.
The SGM2588 is internally current limited and has
thermal shutdown that protects device and load from
over-current damage. Thermal shutdown shuts off the
output MOSFET and asserts the
FAULT
output if the
die temperature exceeds 150℃ until the die temperature
drops to 130℃.
This device employs soft-start circuit that minimizes
inrush current in applications where highly capacitive
loads are employed.
An open drain
FAULT
flag asserts low during over-
current and thermal conditions after a 13ms blanking
time to prevent false reporting.
SGM2588 is available in the Green SOT-23-5 package.
It is rated over the -40℃ to +85℃ temperature range.
APPLICATIONS
General Purpose Power Switching
USB Bus/Self Powered Hubs/Peripherals
ACPI Power Distribution
Smart Phone & LCD TV
FEATURES
● 100mΩ (TYP) High-side N-Channel MOSFET
● Three Current Limit Levels
SGM2588A/B/G: 1100 ± 100mA
SGM2588C/D/I: 2100 ± 210mA
SGM2588E/F/K: 2600 ± 300mA
● Input Voltage Range: 2.5V to 5.5V
● Low 23μA Quiescent Current
● Typical 0.1μA Shutdown Current
● Soft-Start Function
● Thermal Shutdown Protection
● Under-Voltage Lockout Protection for VIN
● No Reversed Leakage Current (Reverse Blocking)
● Fault Flag (
FAULT
) with 13ms Filter Eliminates
False Assertions
● Automatic Output Discharge in Shutdown Mode
(SGM2588A/B/C/D/E/F)
● 500kΩ Pull-Down Resistor at EN Pin
(SGM2588G/I/K)
● Evaluated to IEC 60950-1, Ed 2, Am1, Annex CC,
Test Program 1 with CB Report (SGM2588A/C/E/G/I/K)
● Available in the Green SOT-23-5 Package
TYPICAL APPLICATION
SGM2588A
V
IN
Over-Current/
Over-Temperature Signal
VIN FAULT
GND
C
IN
10μF
Chip Enable
V
OUT
VOUTEN
C
OUT
1μF
10k
Ω
3
2
4
5
1
Figure 1. Typical Application Circuit
SGM2588 Power Distribution Switch
2
DECEMBER 2017
SG Micro Corp
www.sg-micro.com
PACKAGE/ORDERING INFORMATION
MODEL
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
SGM2588A
(Active High)
SOT-23-5
-40℃ to +85℃
SGM2588AYN5G/TR SSCXX Tape and Reel, 3000
SGM2588B
(Active Low)
SOT-23-5
-40℃ to +85℃
SGM2588BYN5G/TR SSDXX Tape and Reel, 3000
SGM2588C
(Active High)
SOT-23-5
-40℃ to +85℃
SGM2588CYN5G/TR SSEXX Tape and Reel, 3000
SGM2588D
(Active Low)
SOT-23-5
-40℃ to +85℃
SGM2588DYN5G/TR ST0XX Tape and Reel, 3000
SGM2588E
(Active High)
SOT-23-5
-40℃ to +85℃
SGM2588EYN5G/TR ST1XX Tape and Reel, 3000
SGM2588F
(Active Low)
SOT-23-5
-40℃ to +85℃
SGM2588FYN5G/TR ST2XX Tape and Reel, 3000
SGM2588G
(Active High)
SOT-23-5
-40℃ to +85℃
SGM2588GYN5G/TR G51XX Tape and Reel, 3000
SGM2588I
(Active High)
SOT-23-5
-40℃ to +85℃
SGM2588IYN5G/TR G52XX Tape and Reel, 3000
SGM2588K
(Active High)
SOT-23-5
-40℃ to +85℃
SGM2588KYN5G/TR G53XX Tape and Reel, 3000
MARKING INFORMATION
NOTE: XX = Date Code.
Date Code -
Year
Date Code
-
Month
Serial Number
YYY X
X
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
ABSOLUTE MAXIMUM RATINGS
All Pins ............................................................................... 6V
FAULT
Current ............................................................ 25mA
Power Dissipation, P
D
@ T
A
= +25℃
SOT-23-5 ....................................................................... 0.3W
Package Thermal Resistance
SOT-23-5, θ
JA
......................................................... 280℃/W
SOT-23-5, θ
JC
........................................................... 93℃/W
Junction Temperature ................................................. +150℃
Storage Temperature Range ........................ -65℃ to +150℃
Lead Temperature (Soldering, 10s) ............................ +260℃
ESD Susceptibility
HBM ............................................................................. 2000V
MM ................................................................................. 400V
RECOMMENDED OPERATING CONDITIONS
Input Voltage Range ........................................... 2.5V to 5.5V
EN Voltage Range ............................................ -0.3V to 5.5V
All Other Pins ......................................................... 0V to 5.5V
Junction Temperature Range ....................... -40℃ to +125℃
Operating Temperature Range ....................... -40℃ to +85℃
OVERSTRESS CAUTION
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation
procedures can cause damage. ESD damage can range from
subtle performance degradation to complete device failure.
Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause
the device not to meet its published specifications.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.