Description
The Wheelock Exceder
TM
Series expands to include the industry’s
first LED notification appliances in one of the smallest, most
compact single gang designs in the world. The LED patented
technology by Eaton provides the industry’s lowest current draw.
Ideal for Green Buildings, it’s the pinnacle of life safety, performance
and energy-efficiency.
As the first notification appliances in the industry to utilize Light
Emitting Diode (LED) as the light source, this breakthrough and
patented optical design, resulting in best-in-class efficiency, enables
material and system cost savings, allowing for a greater number
of appliances on the notification appliance circuit and fewer power
supplies. All strobe models feature a wide-range of candela settings
(15, 30, 75, 110cd) on a single appliance. Models with an audible
feature 2 sound settings (90 & 95 dB). All switches to change
settings, can be set without the use of a tool and are located behind
the appliance to prevent tampering.
Wheelock Exceder
TM
LED strobes, horn strobes and horns feature
the industry’s smallest footprint and a sleek modern design that
will please building owners with reduced total cost of ownership.
Installers will benefit from its comprehensive feature list, including
lowest current draw, single-gang design, no tools needed for setting
changes, and three convenient mounting options for both new and
retrofit construction. These products are suitable for indoor wall-
mount applications. The LST Strobe, LHS Horn Strobe, and the LHN
Horn are for 24V operation. LHN is suitable for 12V applications.
The Exceder
TM
LED notification appliances are listed under UL
Standards 1971 and 464 and under CAN/ULC-S525 and CAN/ULC-
S526.
Exceder LED Strobes and Horn Strobes may be synchronized
when used in conjunction with the Wheelock DSM Sync Modules,
Wheelock Power Supplies, SAFEPATH family of products or other
manufacturers panels incorporating the Wheelock Patented Sync
Protocol. Wheelock synchronized strobes offer an easy way to
comply with ADA recommendations concerning photosensitive
epilepsy.
Exceder LED Horn Strobes, Strobes &
Horns
Technical Data TD450050EN
Effective November 2016
Supersedes May 2014
2
Technical Data TD450050EN
Effective November 2016
Exceder LED Horn Strobes, Strobes & Horns
EATON www.eaton.com
Features
•
Energy Efficient
• Patented LED technology provides industry’s lowest current
draw
• Fewer power supplies required, smaller wire gage, reduced
wire runs
•
Low-Profile Design
• One of the smallest, most compact single-gang designs
• Sleek, modern aesthetics with no visible mounting screws
•
Special Lettering Available
•
4 Field Selectable Settings in 1 Device
• Select 15, 30, 75, 110 cd
•
2 Audible Settings
• Select 90 or 95 dB
• Select temporal or steady horn output
•
Easy-to-Install
• Finger slide switches--No tools needed for
setting changes
• IN/OUT screw terminals using #12 to #18
AWG wires
• Mounting Options include Exceder LSBB, any single-gang back-
box and to 4” square with adapter kit
•
Strobe Synchronization Components
• Meet synchronizing standards with Wheelock’s DSM Sync
Modules, PS Power Supplies or SAFEPATH products
•
Compliance
• UL 1971, UL 464, ULC-S525, ULC-S526
• Factory Mutual (FM)
• California State Fire Marshal (CSFM)
• FCC Part 15, ICES
ote:N Please read these specifications and associated installation instruc-
tions, before using, specifying, or installing this product. Visit Eaton.com/
massnotification for current installation instructions.
General Notes
•
Strobes are designed to flash at 1 flash per second minimum over
their “Regulated Voltage Range.” Note that NFPA-72 specifies a
flash rate of 1 to 2 flashes per second and ADA Guidelines specify
a flash rate of 1 to 3 flashes per second.
•
All candela ratings represent minimum effective Strobe intensity
based on UL 1971.
Drawings
Figure 1. Wall Strobe
Figure 2. Wall Horn Strobe