©2016 Glenair, Inc. REV: 1 US Cage Code 06324 Printed in USA
GLEN AIR, I NC. ∙ 1211 AIR WAY ∙ GLEND ALE, CA 91201-2497 ∙ TEL: 818-247-6000 ∙ FAX: 818-500-9912
www.glenair.com PAGE 2 of 3 E-mail: sales@glenair.com
050-381 PRODUCT BRIEF
Evaluat ion Board
For Gle na ir PCB Mount Dual Transceivers
The 050-381-EVALBOARD can be used to evaluate 050-373 Boar d Mou nt
Dual Optical Transceiver (4 mounting screws) operating from 100Mbps to
5Gbps data rate. The transceivers can be used for bidirectional fiber optic link
over 4 multimode 50µm/125µm or 62.5µm/125µm type fiber optic cables.
For purposes of this document, 050-373, will henceforth be referred to as Unit
under Test (UUT).
The evaluation board is designed as an interface to allow evaluation of the
Optical Transmitters and the Optical receivers on the board mount dual
transceiver module. Devices are powered through the 3.3V and GND
connections.
For each of the transmitters, Fault condition (TXn-Fault) can be monitored via
test points and the Transmitter disable (TXn-Disable) can be controlled via
Jumpers.
For each of the receivers, loss of signal (LOSn) state can be monitored via test
KEY FEATURES/BENEFITS
Supports large variety of Dual Optical
Transmitters/ Receivers suitable for Harsh
Environment (Wide temperature ranges and
Extremely High Vibration)
o 0.1 Gbps to 10 Gbps
APPLICATIONS
As an evaluation tool for Glenair Opto-electronic
modules which are suited to Harsh Environment
Applications such as: Airborne, Tactical Military,
Oil and Gas, Railway and Shipboar d
o Ethernet, Fibre Channel, 1x, 2x, 4x, 8x,
SFPDP, Aurora
o Video (DVI, SMPTE, ARINC818, etc)